Zum Hauptinhalt wechseln

PowerBook G3 Lombard Heat Shield Replacement

Was du brauchst

  1. PowerBook G3 Lombard Heat Shield Replacement, Keyboard: Schritt 1, Bild 1 von 1
    • Turn the computer so that the ports are facing you.

    • If the keyboard is locked, open the port cover and turn the keyboard locking screw until the keyboard is unlocked.

  2. PowerBook G3 Lombard Heat Shield Replacement: Schritt 2, Bild 1 von 1
    • Pull the keyboard release tabs toward you and lift up on the keyboard until it pops free.

    • Make sure you have removed the laptop battery and CD/DVD module from the expansion bays before proceeding.

  3. PowerBook G3 Lombard Heat Shield Replacement: Schritt 3, Bild 1 von 1
    • Lift the keyboard out by pulling it up and away from you. Rest the keyboard, face down, on top of the trackpad.

    • In order to replace the keyboard, you must first remove the modem.

  4. PowerBook G3 Lombard Heat Shield Replacement, Heat Shield: Schritt 4, Bild 1 von 1
    • Remove the three silver Phillips screws that attach the heat shield to the internal metal framework.

  5. PowerBook G3 Lombard Heat Shield Replacement: Schritt 5, Bild 1 von 1
    • Lift the heat shield up and pull it toward you.

  6. PowerBook G3 Lombard Heat Shield Replacement: Schritt 6, Bild 1 von 1
    • Your laptop should look approximately like this.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Ein:e weitere:r Nutzer:in hat diese Anleitung absolviert.

Angehängte Dokumente

iRobot

Mitglied seit: 09/24/09

1 Reputation

636 Anleitungen geschrieben

0 Kommentare

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 1

Letzte 30 Tage: 3

Insgesamt: 2,535