Zum Hauptinhalt wechseln

Olympus Stylus 1010 Motherboard Replacement

Was du brauchst

  1. Olympus Stylus 1010 Motherboard Replacement, Disassembling Olympus Stylus 1010 Case: Schritt 1, Bild 1 von 2 Olympus Stylus 1010 Motherboard Replacement, Disassembling Olympus Stylus 1010 Case: Schritt 1, Bild 2 von 2
    • Remove the five Phillips #00 bottom and right side panel screws.

  2. Olympus Stylus 1010 Motherboard Replacement: Schritt 2, Bild 1 von 1
    • Remove the right side panel by pulling off the large silver piece.

  3. Olympus Stylus 1010 Motherboard Replacement: Schritt 3, Bild 1 von 2 Olympus Stylus 1010 Motherboard Replacement: Schritt 3, Bild 2 von 2
    • Remove the remaining three Phillips #00 side and front panel screws.

  4. Olympus Stylus 1010 Motherboard Replacement: Schritt 4, Bild 1 von 1
    • Using your thumb and forefinger, pull off the silver name plate and silver "T-shape" piece.

  5. Olympus Stylus 1010 Motherboard Replacement: Schritt 5, Bild 1 von 1
    • Remove the black front panel by sliding it towards the lens and then pulling it up off of the camera.

  6. Olympus Stylus 1010 Motherboard Replacement: Schritt 6, Bild 1 von 3 Olympus Stylus 1010 Motherboard Replacement: Schritt 6, Bild 2 von 3 Olympus Stylus 1010 Motherboard Replacement: Schritt 6, Bild 3 von 3
    • Remove the three Phillips #00 screws from the front of the camera.

    • Using a spudger, lift the two tabs to separate the case—one tab on top and one tab on the right side.

  7. Olympus Stylus 1010 Motherboard Replacement: Schritt 7, Bild 1 von 3 Olympus Stylus 1010 Motherboard Replacement: Schritt 7, Bild 2 von 3 Olympus Stylus 1010 Motherboard Replacement: Schritt 7, Bild 3 von 3
    • Using a plastic spudger, lift up the black clips.

    • Still using the plastic spudger, detach the gold connector strip and white connector strip.

    • Using both hands, pull the camera apart into two pieces.

  8. Olympus Stylus 1010 Motherboard Replacement, Lens: Schritt 8, Bild 1 von 2 Olympus Stylus 1010 Motherboard Replacement, Lens: Schritt 8, Bild 2 von 2
    • Using a plastic spudger, lift up the black clips.

    • Still using the spudger, detach the three gold wire tape connectors from the inside of the camera.

  9. Olympus Stylus 1010 Motherboard Replacement: Schritt 9, Bild 1 von 1
    • Remove the three screws from the inside of the camera using a #00 screwdriver.

  10. Olympus Stylus 1010 Motherboard Replacement: Schritt 10, Bild 1 von 2 Olympus Stylus 1010 Motherboard Replacement: Schritt 10, Bild 2 von 2
    • Using your thumb and forefinger, pull the lens piece straight out from the body of the camera.

  11. Olympus Stylus 1010 Motherboard Replacement, Motherboard: Schritt 11, Bild 1 von 1
    • Remove the two Phillips #00 screws on the right side of the camera.

  12. Olympus Stylus 1010 Motherboard Replacement: Schritt 12, Bild 1 von 1
    • Using a plastic spudger, lift up the black clips.

    • Still using the spudger, detach the gold wire tape connectors from the motherboard.

  13. Olympus Stylus 1010 Motherboard Replacement: Schritt 13, Bild 1 von 1
    • Desolder the upper right and lower left wires to remove the motherboard.

  14. Olympus Stylus 1010 Motherboard Replacement: Schritt 14, Bild 1 von 2 Olympus Stylus 1010 Motherboard Replacement: Schritt 14, Bild 2 von 2
    • In order to remove the motherboard, grab each side of it and pull up using your thumb and forefinger.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Max McIntyre

Mitglied seit: 01/21/11

526 Reputation

4 Anleitungen geschrieben

Team

Cal Poly, Team 13-4, Forte Winter 2011 Mitglied von Cal Poly, Team 13-4, Forte Winter 2011

CPSU-FORTE-W11S13G4

6 Mitglieder

12 Anleitungen geschrieben

0 Kommentare

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 1

Letzte 30 Tage: 2

Insgesamt: 3,177