Zum Hauptinhalt wechseln

Disassembling Canon EOS Rebel XS Back Cover

Was du brauchst

  1. Disassembling Canon EOS Rebel XS Back Cover, Latch Side Cover: Schritt 1, Bild 1 von 1
    • Remove the two 3mm (1/8") black screws from the side cover using a #00 Phillips screwdriver.

  2. Disassembling Canon EOS Rebel XS Back Cover: Schritt 2, Bild 1 von 1
    • On the bottom, remove the 6mm (13/64") screw with the #00 Phillips Screwdriver.

    • Pry up the panel; starting from the front/bottom corner, as indicated.

    • There's a concealed lip, under the opposite edge.

  3. Disassembling Canon EOS Rebel XS Back Cover, Back Cover: Schritt 3, Bild 1 von 1
    • Remove the three long black screws from the bottom using a #00 Phillips screwdriver.

    • Use tweezers to lift the panel.

  4. Disassembling Canon EOS Rebel XS Back Cover: Schritt 4, Bild 1 von 1
    • Once you have detached the back cover, use a pair of tweezers to lightly pull on strap found connecting the back cover to the camera.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Ein:e weitere:r Nutzer:in hat diese Anleitung absolviert.

Daniel Bussone

Mitglied seit: 01/28/11

1.251 Reputation

11 Anleitungen geschrieben

Team

Cal Poly, Team 3-41, Regan Winter 2011 Mitglied von Cal Poly, Team 3-41, Regan Winter 2011

CPSU-REGAN-W11S3G41

2 Mitglieder

21 Anleitungen geschrieben

0 Kommentare

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 0

Letzte 30 Tage: 3

Insgesamt: 3,859