Zum Hauptinhalt wechseln

Sharp Aquos LC13B2UA Motherboard Replacement

Was du brauchst

  1. Sharp Aquos LC13B2UA Motherboard Replacement, Stand: Schritt 1, Bild 1 von 2 Sharp Aquos LC13B2UA Motherboard Replacement, Stand: Schritt 1, Bild 2 von 2
    • Place the TV face down on a flat smooth surface as to not scratch the screen.

    • Using a Phillips #2 screwdriver remove the four 8mm screws attaching the stand to the TV.

  2. Sharp Aquos LC13B2UA Motherboard Replacement: Schritt 2, Bild 1 von 2 Sharp Aquos LC13B2UA Motherboard Replacement: Schritt 2, Bild 2 von 2
    • Lift the stand off the television.

  3. Sharp Aquos LC13B2UA Motherboard Replacement, Back Case: Schritt 3, Bild 1 von 3 Sharp Aquos LC13B2UA Motherboard Replacement, Back Case: Schritt 3, Bild 2 von 3 Sharp Aquos LC13B2UA Motherboard Replacement, Back Case: Schritt 3, Bild 3 von 3
    • Remove the two back panels by prying them out with your hands.

  4. Sharp Aquos LC13B2UA Motherboard Replacement: Schritt 4, Bild 1 von 2 Sharp Aquos LC13B2UA Motherboard Replacement: Schritt 4, Bild 2 von 2
    • Using a Phillips #2 screwdriver, remove the eight 6mm Phillips screws located around the edge.

    • Using a Phillips #2 screwdriver, remove the two 6mm Phillips screws located near the inputs.

  5. Sharp Aquos LC13B2UA Motherboard Replacement: Schritt 5, Bild 1 von 1
    • Using your hands, gently lift and remove the back case of the television.

  6. Sharp Aquos LC13B2UA Motherboard Replacement, Motherboard: Schritt 6, Bild 1 von 3 Sharp Aquos LC13B2UA Motherboard Replacement, Motherboard: Schritt 6, Bild 2 von 3 Sharp Aquos LC13B2UA Motherboard Replacement, Motherboard: Schritt 6, Bild 3 von 3
    • Remove the two speaker cables and the connector from the circuit board by pinching the plastic connectors and firmly pulling up.

    • Pull on the plastic part of the connector, even though it may seem easiest to pull on the wires.

  7. Sharp Aquos LC13B2UA Motherboard Replacement: Schritt 7, Bild 1 von 2 Sharp Aquos LC13B2UA Motherboard Replacement: Schritt 7, Bild 2 von 2
    • Remove the green and gray power connector from the side of the buttons panel at the top of the television.

    • Remove the green/gray to orange/gray connector from the center of the circuit board.

  8. Sharp Aquos LC13B2UA Motherboard Replacement: Schritt 8, Bild 1 von 2 Sharp Aquos LC13B2UA Motherboard Replacement: Schritt 8, Bild 2 von 2
    • Remove the four 5mm phillips screws attaching the LCD and circuit board to the front case.

  9. Sharp Aquos LC13B2UA Motherboard Replacement: Schritt 9, Bild 1 von 1
    • Lift the circuit board/LCD block from the case by lifting the near side of the circuit board and sliding it under the button frame.

Abschluss

To reassemble your device, follow these instructions in reverse order.

2 weitere Nutzer:innen haben diese Anleitung absolviert.

Robert Hobson

Mitglied seit: 01/20/11

1.275 Reputation

9 Anleitungen geschrieben

Team

Cal Poly, Team 1-11, Amido Winter 2011 Mitglied von Cal Poly, Team 1-11, Amido Winter 2011

CPSU-AMIDO-W11S1G11

4 Mitglieder

9 Anleitungen geschrieben

0 Kommentare

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 2

Letzte 7 Tage: 2

Letzte 30 Tage: 6

Insgesamt: 7,406