Einleitung
Do you have a shirt with straps that are too long? These instructions will teach you how to reduce the length of your shirt straps using a sewing machine. If at any time you feel confused by the terminology, please refer to iFixit's Sewing Glossary.
Was du brauchst
-
-
Put on the shirt.
-
Pull the strap up until you reach your new desired length. Be sure to take the same amount of fabric from the front and the back of the seam.
-
Pin both straps to the desired length.
-
-
-
Remove the shirt.
-
Measure and take a note of the length. Make sure it is the same on both straps.
-
-
-
Remove the pins and flip the shirt inside out.
-
Re-pin both shirt straps. Make sure the pins follow the measurements you just took.
-
Make sure you have a clear line to sew along.
-
Check and make sure the base of the straps are lined up for a continuous edge on your shirt.
-
-
-
-
Thread the sewing machine and set it to your desired stitch length.
-
Align the pinned part of the shirt with the needle.
-
Put down the presser foot.
-
-
-
Sew along the line mapped out by your pins.
-
Pull out the pins as you sew. Make sure not to sew over any of them.
-
Make sure to backstitch at each end of the seam.
-
Repeat this step for each strap.
-
-
-
Put the shirt back on.
-
Confirm the new length that you chose for the garment.
-
If the straps are too still long or short, carefully rip out your new seam and return to Step 1.
-
-
-
Cut excess fabric from the new seams, leaving ¼ inch to ½ inch.
-
Iron the seam allowance left after your cut to the back of the shirt.
-
-
-
Flip the shirt right side out.
-
Make a straight stitch approximately 1/8 inch behind the new shoulder seam on the outside edge.
-
Your shirt straps now should be secured at their new length.
Your shirt straps now should be secured at their new length.
Rückgängig: Ich habe diese Anleitung nicht absolviert.
2 weitere Nutzer:innen haben diese Anleitung absolviert.
Team
Cal Poly, Team 15-2, Green Fall 2015 Mitglied von Cal Poly, Team 15-2, Green Fall 2015
CPSU-GREEN-F15S15G2
4 Mitglieder
4 Anleitungen geschrieben
