Zum Hauptinhalt wechseln

Kolcraft Cloud Plus Wheel Replacement

Was du brauchst

  1. Kolcraft Cloud Plus Wheel Replacement, Wheel: Schritt 1, Bild 1 von 2 Kolcraft Cloud Plus Wheel Replacement, Wheel: Schritt 1, Bild 2 von 2
    • Applying too much force to the spudger can cause the spudger to bend or the hubcap to break. To avoid this, try prying the hubcap from a different angle or positioning your spudger at a different points around the hubcap.

    • Use the spaded side of the metal spudger to pry off the small black hubcap on the outside of the rear wheel.

  2. Kolcraft Cloud Plus Wheel Replacement: Schritt 2, Bild 1 von 2 Kolcraft Cloud Plus Wheel Replacement: Schritt 2, Bild 2 von 2
    • Pull on the looped end of the cotter pin to remove it.

  3. Kolcraft Cloud Plus Wheel Replacement: Schritt 3, Bild 1 von 2 Kolcraft Cloud Plus Wheel Replacement: Schritt 3, Bild 2 von 2
    • Remove the metal washer by sliding it off the axle.

  4. Kolcraft Cloud Plus Wheel Replacement: Schritt 4, Bild 1 von 1
    • Slide the wheel off of the axle.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Ein:e weitere:r Nutzer:in hat diese Anleitung absolviert.

Team

Cal Poly, Team 11-1, Forte Fall 2015 Mitglied von Cal Poly, Team 11-1, Forte Fall 2015

CPSU-FORTE-F15S11G1

4 Mitglieder

3 Anleitungen geschrieben

0 Kommentare

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 6

Letzte 30 Tage: 31

Insgesamt: 4,233