Einleitung
Components below the laptop need to be removed before you can detach the keyboard. This is a guide to remove your laptop's keyboard.
Was du brauchst
-
-
Flip the computer so the bottom is facing up with the battery away from you.
-
-
-
Slide the battery switch to the left until the battery unlatches from the base of the laptop.
-
-
-
Loosen the two 5.7 mm screws on the bottom panel using a PH00 screwdriver.
-
-
-
-
Using a PH 00 screwdriver, remove the screw located next to the wireless card.
-
-
-
Insert a plastic spudger or similar pry tool, beneath the keyboard, near the "insert" key, and pop the keyboard up from the laptop.
-
Starting at the opening you just created, run your fingers around the outside of the keyboard separating it from the rest of the computer.
-
-
-
Slightly angle the keyboard back so the ribbon connector underneath it is visible.
-
Remove the ribbon cable by using your fingers to pull up and away from the connector.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Rückgängig: Ich habe diese Anleitung nicht absolviert.
9 weitere Nutzer:innen haben diese Anleitung absolviert.
Team
Baylor, Team 10-12, Williams Fall 2015 Mitglied von Baylor, Team 10-12, Williams Fall 2015
BU-WILLIAMS-F15S10G12
3 Mitglieder
8 Anleitungen geschrieben
