Was du brauchst
-
-
-
Unscrew the 8 screws using a Phillips (PH#00) screwdriver
-
Using a plastic opening tool , once again pry up on the edges of the plastic back cover.
-
-
-
Gently disconect the screen cable using a spudger.
-
Using the spudger, pry the motherboard away from the screen assembly.
-
-
-
Use a heat gun or hairdryer to heat up the edges. This will loosen the glue so the screen can be removed.
-
Continue to heat and separate until the screen comes completely apart from the rest of the phone using plastic tools
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Rückgängig: Ich habe diese Anleitung nicht absolviert.
7 weitere Nutzer:innen haben diese Anleitung absolviert.
