Zum Hauptinhalt wechseln

iRobot Roomba 560 Side Sweeper Replacement

Was du brauchst

  1. iRobot Roomba 560 Side Sweeper Replacement, Side Sweeper: Schritt 1, Bild 1 von 1
    • Flip the Roomba upside down.

    • Unscrew the single 5 mm screw on the yellow side sweeper using the Phillips #2 driver.

  2. iRobot Roomba 560 Side Sweeper Replacement: Schritt 2, Bild 1 von 1
    • Lift the yellow side sweeper, removing it from the device.

Abschluss

To reassemble your device, follow these instructions in reverse order.

3 weitere Nutzer:innen haben diese Anleitung absolviert.

Team

Cal Poly, Team 1-22, Maness Fall 2015 Mitglied von Cal Poly, Team 1-22, Maness Fall 2015

CPSU-MANESS-F15S1G22

4 Mitglieder

14 Anleitungen geschrieben

2 Kommentare

I need to replace the part on the bottom where the side sweeper screws in. The threads are stripped, I’m guessing, and screw won’t stay in.

Candy Schnurr - Antwort

put some hot glue or melt some plastic in the hole before screwing it. you should get the threads back when you unscrew it

Nicolas Sicard -

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 3

Letzte 30 Tage: 18

Insgesamt: 1,666