Zum Hauptinhalt wechseln

Sony VAIO PCG-933A Keyboard Replacement

Was du brauchst

  1. Sony VAIO PCG-933A Keyboard Replacement, Battery: Schritt 1, Bild 1 von 2 Sony VAIO PCG-933A Keyboard Replacement, Battery: Schritt 1, Bild 2 von 2
    • Turn the laptop upside down so that the top is sitting on a flat surface.

    • If you are looking at the bottom of the laptop the battery is located on the front right side of the laptop; the opposite side from the floppy disk drive.

  2. Sony VAIO PCG-933A Keyboard Replacement: Schritt 2, Bild 1 von 3 Sony VAIO PCG-933A Keyboard Replacement: Schritt 2, Bild 2 von 3 Sony VAIO PCG-933A Keyboard Replacement: Schritt 2, Bild 3 von 3
    • As shown by the arrow, slide the plastic cover up and then pull out and downwards.

    • You should now be able to pull the battery out.

  3. Sony VAIO PCG-933A Keyboard Replacement, Keyboard: Schritt 3, Bild 1 von 1
    • Remove the four 16 mm screws bordering the edge of the laptop using a Phillips #0 screwdriver.

  4. Sony VAIO PCG-933A Keyboard Replacement: Schritt 4, Bild 1 von 2 Sony VAIO PCG-933A Keyboard Replacement: Schritt 4, Bild 2 von 2
    • Remove the 4mm screw on the right rear side of the laptop next to the audio ports using a Phillips #0 screwdriver.

    • This will release the speaker grille.

  5. Sony VAIO PCG-933A Keyboard Replacement: Schritt 5, Bild 1 von 1
    • Flip the computer so the key board is facing up.

  6. Sony VAIO PCG-933A Keyboard Replacement: Schritt 6, Bild 1 von 3 Sony VAIO PCG-933A Keyboard Replacement: Schritt 6, Bild 2 von 3 Sony VAIO PCG-933A Keyboard Replacement: Schritt 6, Bild 3 von 3
    • Slide the blue speaker grille (located above the keyboard) to the right and gently pull upward. The grille will still be connected by a white electrical strip.

    • Carefully pull out the white electrical strip. By doing this you will remove the speaker grille.

  7. Sony VAIO PCG-933A Keyboard Replacement: Schritt 7, Bild 1 von 3 Sony VAIO PCG-933A Keyboard Replacement: Schritt 7, Bild 2 von 3 Sony VAIO PCG-933A Keyboard Replacement: Schritt 7, Bild 3 von 3
    • Remove the 4mm screw in the center using a Phillips screwdriver.

    • Carefully and slowly pull the green strip straight up (away from the laptop) to disconnect it. Make sure not to pull too hard to avoid breaking.

    • The keyboard can now be removed.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Sara Lillard

Mitglied seit: 04/11/11

165 Reputation

8 Anleitungen geschrieben

Team

Cal Poly, Team 12-36, Maness Spring 2011 Mitglied von Cal Poly, Team 12-36, Maness Spring 2011

CPSU-MANESS-S11S12G36

4 Mitglieder

16 Anleitungen geschrieben

0 Kommentare

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 1

Letzte 30 Tage: 2

Insgesamt: 1,770