Zum Hauptinhalt wechseln

Palm Zire 71 Back Cover Replacement

Was du brauchst

  1. Palm Zire 71 Back Cover Replacement, Preparation: Schritt 1, Bild 1 von 1
    • Flip the phone so it's facing screen-side down.

    • Slide the back cover upward to open.

  2. Palm Zire 71 Back Cover Replacement, Top Screws (2) Removal: Schritt 2, Bild 1 von 1
    • Use a Torx T5 screwdriver to remove the top two screws.

  3. Palm Zire 71 Back Cover Replacement, Bottom Screws (3) Removal: Schritt 3, Bild 1 von 1
    • Remove the back sticker.

    • Remove the three bottom Phillips #00 screws.

  4. Palm Zire 71 Back Cover Replacement, Front Panel Removal: Schritt 4, Bild 1 von 2 Palm Zire 71 Back Cover Replacement, Front Panel Removal: Schritt 4, Bild 2 von 2
    • Flip the phone over so it's facing screen-side up.

    • Slide the screen upward by a few millimeters without detaching the screen.

    • Use the plastic opening tool to pry off the front panel.

  5. Palm Zire 71 Back Cover Replacement, Bracket and Speaker Removal: Schritt 5, Bild 1 von 2 Palm Zire 71 Back Cover Replacement, Bracket and Speaker Removal: Schritt 5, Bild 2 von 2
    • Remove the bottom two Phillips #00 screws.

    • Remove the bracket.

    • Use the plastic opening tool to pry off the speaker.

  6. Palm Zire 71 Back Cover Replacement, Back Cover: Schritt 6, Bild 1 von 2 Palm Zire 71 Back Cover Replacement, Back Cover: Schritt 6, Bild 2 von 2
    • Slide the back cover off.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Ein:e weitere:r Nutzer:in hat diese Anleitung absolviert.

Jinxian Jiang

Mitglied seit: 04/28/11

245 Reputation

3 Anleitungen geschrieben

Team

CSU Los Angeles, Team 1-5, Nelson Spring 2011 Mitglied von CSU Los Angeles, Team 1-5, Nelson Spring 2011

CSULA-NELSON-S11S1G5

3 Mitglieder

6 Anleitungen geschrieben

0 Kommentare

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 2

Letzte 30 Tage: 6

Insgesamt: 2,460