Einleitung
This guide will walk through the steps of replacing a damaged or unresponsive digitizer/LCD of a Magellan RoadMate 2120T-LM. Before replacing the touch-screen, check for software updates from Magellan to rule out software issues.
Was du brauchst
-
-
Turn the GPS over on its backside and remove the six 3 mm Phillips #1 screws.
-
-
-
Disconnect battery and speaker cables from the motherboard at indicated places.
-
-
-
-
Pull up on the brown tab holding down the ribbon.
-
Lift up on the motherboard and remove it from device.
-
-
-
Pry back on the plastic shell surrounding the touchscreen and remove the screen.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.