Zum Hauptinhalt wechseln

How to clean Nikon N2000 (F301) battery corrosion

Was du brauchst

    • In this guide we will be referring to 'left'and 'right' as though the camera's front (the part that says Nikon) facing you.

    • Use a quarter to twist open the one large screw on the bottom case. (No picture available.)

  1. How to clean Nikon N2000 (F301) battery corrosion: Schritt 2, Bild 1 von 1
    • Pull up on the tab to remove the batteries.

    • Note: The batteries will probably fall out of their holder.

  2. How to clean Nikon N2000 (F301) battery corrosion: Schritt 3, Bild 1 von 1
    • Your camera should look something like this.

    • Clean the marked areas with a cotton swab soaked in CLR or vinegar.

  3. How to clean Nikon N2000 (F301) battery corrosion: Schritt 4, Bild 1 von 1
    • Corrosion appears as the bluish build-up you see in this picture. Scrub with a cotton swab until it has visibly decreased.

  4. How to clean Nikon N2000 (F301) battery corrosion: Schritt 5, Bild 1 von 1
    • All cleaned up!

Abschluss

Reinsert the batteries by following the instructions backwards. If it's still not getting power, head over to our battery compartment replacement guide. Note: It may be tough to find replacement parts.

3 weitere Nutzer:innen haben diese Anleitung absolviert.

Team

Cal Poly, Team 25-26, Garner Spring 2011 Mitglied von Cal Poly, Team 25-26, Garner Spring 2011

CPSU-GARNER-S11S25G26

3 Mitglieder

12 Anleitungen geschrieben

2 Kommentare

Wow it working thanks for assisting me. I used vinegar to clean my camera so it working now

lazarusmolai - Antwort

Thumb down! Step 5 says, “All cleaned up!” But the picture shows much corrosion still present. Asking for further problems! Look up: "Nintendo Gameboy Pocket Shell-Side Battery Terminal CorrosionRemoval” for tips how to do it more thoroughly.

Wolf Naegeli - Antwort

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 3

Letzte 7 Tage: 17

Letzte 30 Tage: 66

Insgesamt: 15,605