Zum Hauptinhalt wechseln

PowerBook G4 Titanium Mercury Keyboard Replacement

Was du brauchst

  1. PowerBook G4 Titanium Mercury Keyboard Replacement, Keyboard: Schritt 1, Bild 1 von 1
    • Remove the battery.

    • Turn the keyboard locking screw so that it is parallel to the space bar.

    • Pull the keyboard release tabs toward you and lift up on the keyboard until it pops free.

  2. PowerBook G4 Titanium Mercury Keyboard Replacement: Schritt 2, Bild 1 von 1
    • Rest the keyboard face down on the trackpad area.

    • Disconnect the keyboard connector from the logic board.

  3. PowerBook G4 Titanium Mercury Keyboard Replacement: Schritt 3, Bild 1 von 1
    • Your laptop should look approximately like this.

Abschluss

To reassemble your device, follow these instructions in reverse order.

3 weitere Nutzer:innen haben diese Anleitung absolviert.

Angehängte Dokumente

iRobot

Mitglied seit: 09/24/09

1 Reputation

636 Anleitungen geschrieben

0 Kommentare

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 1

Letzte 30 Tage: 8

Insgesamt: 5,543