Zum Hauptinhalt wechseln

Removing Minolta X-370 Lens Holder

Was du brauchst

  1. Removing Minolta X-370 Lens Holder, Minolta X-370 Battery Replacement: Schritt 1, Bild 1 von 2 Removing Minolta X-370 Lens Holder, Minolta X-370 Battery Replacement: Schritt 1, Bild 2 von 2
    • Flip the camera so that the bottom is facing you.

    • Take a spare coin and unscrew the battery cover off.

  2. Removing Minolta X-370 Lens Holder: Schritt 2, Bild 1 von 1
    • Remove the batteries, making sure to note their proper alignment.

  3. Removing Minolta X-370 Lens Holder, Bottom Cover: Schritt 3, Bild 1 von 2 Removing Minolta X-370 Lens Holder, Bottom Cover: Schritt 3, Bild 2 von 2
    • Remove two 4.8mm screws.

    • Remove one 3.4mm screw.

    • Remove one 2.65mm screw.

    • Lift off the back cover.

  4. Removing Minolta X-370 Lens Holder: Schritt 4, Bild 1 von 1
    • Remove three 3.5mm screws.

    • Remove two 3.8mm screws.

    • Remove one 6.35mm screw.

    • Remove one 4mm screw. Lift off the disk.

    • Remove one 5.11mm screw.

  5. Removing Minolta X-370 Lens Holder: Schritt 5, Bild 1 von 1
    • Lift up the silver, metal piece

    • Please note that some internal pieces may come loose during this process.

  6. Removing Minolta X-370 Lens Holder, Lens Holder: Schritt 6, Bild 1 von 3 Removing Minolta X-370 Lens Holder, Lens Holder: Schritt 6, Bild 2 von 3 Removing Minolta X-370 Lens Holder, Lens Holder: Schritt 6, Bild 3 von 3
    • Remove four 4.45mm screws and remove the alignment ring.

    • Remove the interior metal ring and the black plastic ring. Pay attention to the spring's location.

    • Pay attention to the alignment of the interior metal ring and the black plastic ring.

  7. Removing Minolta X-370 Lens Holder: Schritt 7, Bild 1 von 3 Removing Minolta X-370 Lens Holder: Schritt 7, Bild 2 von 3 Removing Minolta X-370 Lens Holder: Schritt 7, Bild 3 von 3
    • Remove the two black stoppers.

    • Using the metal spudger, remove the two triangular hangers.

  8. Removing Minolta X-370 Lens Holder: Schritt 8, Bild 1 von 2 Removing Minolta X-370 Lens Holder: Schritt 8, Bild 2 von 2
    • Using the metal spudger, peel off the right leather cover.

    • Be careful not to tear the cover because you will need to use it again.

  9. Removing Minolta X-370 Lens Holder: Schritt 9, Bild 1 von 3 Removing Minolta X-370 Lens Holder: Schritt 9, Bild 2 von 3 Removing Minolta X-370 Lens Holder: Schritt 9, Bild 3 von 3
    • Use the metal spudger to remove both the grip cover and the left leather cover.

    • Be careful not to tear the covers because you will need to use them again.

  10. Removing Minolta X-370 Lens Holder: Schritt 10, Bild 1 von 2 Removing Minolta X-370 Lens Holder: Schritt 10, Bild 2 von 2
    • Remove two 5.3mm screws.

    • Remove two 5.3mm screws.

    • Remove one 2.35mm screws.

  11. Removing Minolta X-370 Lens Holder: Schritt 11, Bild 1 von 2 Removing Minolta X-370 Lens Holder: Schritt 11, Bild 2 von 2
    • Remove the left and right plastic covers.

  12. Removing Minolta X-370 Lens Holder: Schritt 12, Bild 1 von 3 Removing Minolta X-370 Lens Holder: Schritt 12, Bild 2 von 3 Removing Minolta X-370 Lens Holder: Schritt 12, Bild 3 von 3
    • Remove two 6.65mm screws.

    • Remove two 2.93mm screws.

    • Remove four 5.3mm screws.

    • Remove the black plastic lens holder.

Abschluss

To reassemble your device, follow these instructions in reverse order.

4 weitere Nutzer:innen haben diese Anleitung absolviert.

Nick

Mitglied seit: 04/19/11

525 Reputation

4 Anleitungen geschrieben

Team

Cal Poly, Team 8-7, Regan Spring 2011 Mitglied von Cal Poly, Team 8-7, Regan Spring 2011

CPSU-REGAN-S11S8G7

4 Mitglieder

8 Anleitungen geschrieben

Ein Kommentar

I have Problems to assemble the new black plastic lens holder.

The space between camera Cup and the housing is very low.

Did someone have the same Problems ?

Klaus Kohlhas - Antwort

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 2

Letzte 30 Tage: 10

Insgesamt: 7,188