Zum Hauptinhalt wechseln

Verizon Ellipsis Jetpack MHS800L Screen Replacement

Was du brauchst

  1. Verizon Ellipsis Jetpack MHS800L Screen Replacement, Plastic Case: Schritt 1, Bild 1 von 3 Verizon Ellipsis Jetpack MHS800L Screen Replacement, Plastic Case: Schritt 1, Bild 2 von 3 Verizon Ellipsis Jetpack MHS800L Screen Replacement, Plastic Case: Schritt 1, Bild 3 von 3
    • Remove the SIM card, that is located on top of the Jetpack.

  2. Verizon Ellipsis Jetpack MHS800L Screen Replacement: Schritt 2, Bild 1 von 3 Verizon Ellipsis Jetpack MHS800L Screen Replacement: Schritt 2, Bild 2 von 3 Verizon Ellipsis Jetpack MHS800L Screen Replacement: Schritt 2, Bild 3 von 3
    In diesem Schritt verwendetes Werkzeug:
    Phillips #00 Screwdriver
    $5.49
    Kaufen
    • With the device on its back and the label facing you, remove the rubber screw cover on the top left corner of the device.

    • Under the rubber circle, remove the 1.25 mm screw using a Phillips #00 Screwdriver.

    • You may need to peel back a piece of double sided tape covering the screw hole.

  3. Verizon Ellipsis Jetpack MHS800L Screen Replacement: Schritt 3, Bild 1 von 1
    • Remove three 1.25 mm screws.

  4. Verizon Ellipsis Jetpack MHS800L Screen Replacement: Schritt 4, Bild 1 von 1
    In diesem Schritt verwendetes Werkzeug:
    iFixit Opening Picks (Set of 6)
    $4.99
    Kaufen
  5. Verizon Ellipsis Jetpack MHS800L Screen Replacement: Schritt 5, Bild 1 von 1
    • Once the cover is off, this is what your device will look like.

  6. Verizon Ellipsis Jetpack MHS800L Screen Replacement, Battery: Schritt 6, Bild 1 von 2 Verizon Ellipsis Jetpack MHS800L Screen Replacement, Battery: Schritt 6, Bild 2 von 2
    • Once you have the case off of your device gently pull your battery away from the device.

    • Do not attempt to completely remove the battery, as it is still attached to the motherboard by wires.

  7. Verizon Ellipsis Jetpack MHS800L Screen Replacement: Schritt 7, Bild 1 von 2 Verizon Ellipsis Jetpack MHS800L Screen Replacement: Schritt 7, Bild 2 von 2
    In diesem Schritt verwendetes Werkzeug:
    Tweezers
    $4.99
    Kaufen
    • With a pair of Tweezers remove the yellow tape covering the battery wires.

  8. Verizon Ellipsis Jetpack MHS800L Screen Replacement: Schritt 8, Bild 1 von 1
    In diesem Schritt verwendetes Werkzeug:
    Tweezers
    $4.99
    Kaufen
    • After removing the tape you may use the Tweezers to remove the wiring harness from the circuit board.

    • Do not squeeze the wires to hard you may damage them and cause a short.

  9. Verizon Ellipsis Jetpack MHS800L Screen Replacement: Schritt 9, Bild 1 von 1
    • You may now replace the battery in your Verizon Ellipsis Jetpack MHS800L.

  10. Verizon Ellipsis Jetpack MHS800L Screen Replacement, Screen: Schritt 10, Bild 1 von 3 Verizon Ellipsis Jetpack MHS800L Screen Replacement, Screen: Schritt 10, Bild 2 von 3 Verizon Ellipsis Jetpack MHS800L Screen Replacement, Screen: Schritt 10, Bild 3 von 3
    • Locate the LCD screen cable and unlatch the harness connection form the circuit board.

  11. Verizon Ellipsis Jetpack MHS800L Screen Replacement: Schritt 11, Bild 1 von 2 Verizon Ellipsis Jetpack MHS800L Screen Replacement: Schritt 11, Bild 2 von 2
    In diesem Schritt verwendetes Werkzeug:
    Tweezers
    $4.99
    Kaufen
    • Using the Tweezers gently coax the display data cable out of circuit board connector.

    • Do not squeeze the display data cable to hard you may damage it and cause a short.

  12. Verizon Ellipsis Jetpack MHS800L Screen Replacement: Schritt 12, Bild 1 von 2 Verizon Ellipsis Jetpack MHS800L Screen Replacement: Schritt 12, Bild 2 von 2
    In diesem Schritt verwendetes Werkzeug:
    Tweezers
    $4.99
    Kaufen
    • Gently insert the Tweezers underneath the LCD screen and lift the LCD screen off of the circuit board.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Ein:e weitere:r Nutzer:in hat diese Anleitung absolviert.

Team

IUPUI, Team 3-3, Baechle Spring 2016 Mitglied von IUPUI, Team 3-3, Baechle Spring 2016

IUPUI-BAECHLE-S16S3G3

4 Mitglieder

6 Anleitungen geschrieben

0 Kommentare

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 2

Letzte 30 Tage: 7

Insgesamt: 2,138