Zum Hauptinhalt wechseln

Acer AL1916 Display Replacement

Was du brauchst

  1. Acer AL1916 Display Replacement, Stand: Schritt 1, Bild 1 von 1
    • Lay the monitor on a flat surface so that the back is facing up.

  2. Acer AL1916 Display Replacement: Schritt 2, Bild 1 von 2 Acer AL1916 Display Replacement: Schritt 2, Bild 2 von 2
    • Grab the hinge cover with both hands on either side of the stand.

    • Squeeze inwards with your thumbs and fingers and lift up to remove the hinge cover.

  3. Acer AL1916 Display Replacement: Schritt 3, Bild 1 von 2 Acer AL1916 Display Replacement: Schritt 3, Bild 2 von 2
    • Remove the four 12.1 mm Phillips #2 screws that hold the stand to the monitor.

    • Support the monitor while removing the screws to prevent the monitor from falling.

    • Lift up to detach the stand.

  4. Acer AL1916 Display Replacement, Outer Case: Schritt 4, Bild 1 von 2 Acer AL1916 Display Replacement, Outer Case: Schritt 4, Bild 2 von 2
    • Remove the five 9.5 mm Phillips #2 screws located around the perimeter of the monitor.

  5. Acer AL1916 Display Replacement: Schritt 5, Bild 1 von 3 Acer AL1916 Display Replacement: Schritt 5, Bild 2 von 3 Acer AL1916 Display Replacement: Schritt 5, Bild 3 von 3
    • Starting at the corner of the monitor, wedge the small plastic opening tool between the back cover and the display bezel.

    • Tilt the plastic opening tool up to separate the back cover from the display bezel.

    • Continue around the perimeter of the monitor until the display bezel comes off.

    • A reasonable amount of force is necessary to detach the back cover from the display bezel.

  6. Acer AL1916 Display Replacement: Schritt 6, Bild 1 von 2 Acer AL1916 Display Replacement: Schritt 6, Bild 2 von 2
    • Reposition the monitor so that the back is facing up.

    • Grab the corners of the monitor and jiggle them upwards to detach the back cover from the inside of the monitor.

    • Lift the back cover up.

  7. Acer AL1916 Display Replacement, EMI Shield: Schritt 7, Bild 1 von 2 Acer AL1916 Display Replacement, EMI Shield: Schritt 7, Bild 2 von 2
    • Remove the two 5.7 mm Phillips #2 screws located on either side of the EMI shield.

  8. Acer AL1916 Display Replacement: Schritt 8, Bild 1 von 2 Acer AL1916 Display Replacement: Schritt 8, Bild 2 von 2
    • Using a nut driver (or if necessary, needle-nose pliers), remove the two nuts on either side of the VGA input.

  9. Acer AL1916 Display Replacement: Schritt 9, Bild 1 von 3 Acer AL1916 Display Replacement: Schritt 9, Bild 2 von 3 Acer AL1916 Display Replacement: Schritt 9, Bild 3 von 3
    • Grab the metal casing by the sides and slide it down towards the bottom of the monitor.

    • Lift up to remove the metal casing.

    • Beware, metal casing is sharp!

  10. Acer AL1916 Display Replacement, Display: Schritt 10, Bild 1 von 2 Acer AL1916 Display Replacement, Display: Schritt 10, Bild 2 von 2
    • Remove the three gold 7.5 mm Phillips #2 screws and one silver 8.3 mm Phillips #2 screw from the power supply.

  11. Acer AL1916 Display Replacement: Schritt 11, Bild 1 von 3 Acer AL1916 Display Replacement: Schritt 11, Bild 2 von 3 Acer AL1916 Display Replacement: Schritt 11, Bild 3 von 3
    • Remove the two pieces of yellow tape on the left side of the power supply.

  12. Acer AL1916 Display Replacement: Schritt 12, Bild 1 von 2 Acer AL1916 Display Replacement: Schritt 12, Bild 2 von 2
    • Remove the four little white clips located underneath the pieces of tape by lifting up on their left side.

  13. Acer AL1916 Display Replacement: Schritt 13, Bild 1 von 3 Acer AL1916 Display Replacement: Schritt 13, Bild 2 von 3 Acer AL1916 Display Replacement: Schritt 13, Bild 3 von 3
    • With the needle-nose pliers, remove the four display connectors by pulling directly left.

  14. Acer AL1916 Display Replacement: Schritt 14, Bild 1 von 3 Acer AL1916 Display Replacement: Schritt 14, Bild 2 von 3 Acer AL1916 Display Replacement: Schritt 14, Bild 3 von 3
    • Remove the display cable located at the top of the circuit board by pulling it out towards the top of the monitor.

  15. Acer AL1916 Display Replacement: Schritt 15, Bild 1 von 3 Acer AL1916 Display Replacement: Schritt 15, Bild 2 von 3 Acer AL1916 Display Replacement: Schritt 15, Bild 3 von 3
    • Turn the monitor on its side so that the power supply and circuit board are facing to the right

    • Remove the two 6.6 mm Phillips #2 screws located on both sides of the metal casing (four screws total).

  16. Acer AL1916 Display Replacement: Schritt 16, Bild 1 von 2 Acer AL1916 Display Replacement: Schritt 16, Bild 2 von 2
    • Set the monitor back down so that the power supply and circuit board are facing you.

    • Feed all four of the connector wires down through the metal casing.

  17. Acer AL1916 Display Replacement: Schritt 17, Bild 1 von 3 Acer AL1916 Display Replacement: Schritt 17, Bild 2 von 3 Acer AL1916 Display Replacement: Schritt 17, Bild 3 von 3
    • Grab the sides of the metal casing and lift up.

    • Turn the display over to see the front; you are ready replace the broken display with a new one!

Abschluss

To reassemble your device, follow these instructions in reverse order.

5 weitere Nutzer:innen haben diese Anleitung absolviert.

Keith

Mitglied seit: 10/06/11

336 Reputation

4 Anleitungen geschrieben

Team

Cal Poly, Team 20-26, Maness Fall 2011 Mitglied von Cal Poly, Team 20-26, Maness Fall 2011

CPSU-MANESS-F11S20G26

4 Mitglieder

14 Anleitungen geschrieben

0 Kommentare

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 9

Letzte 30 Tage: 32

Insgesamt: 8,760