Einleitung
Remove 4 Torx screws and 2 #00 Philps
Was du brauchst
-
-
-
Remove the four 4.9mm T6 Torx screws that secure the back panel to the rest of the phone.
-
-
-
Remove the two 4.3mm Phillips #00 screws that secure the back panel to the rest of the phone.
-
-
-
Insert the plastic opening tool along the seams at different points to it pry the clips off.
-
Fast fertig!
To reassemble your device, follow these instructions in reverse order.
Abschluss
To reassemble your device, follow these instructions in reverse order.