Zum Hauptinhalt wechseln

HTC Wizard 200 Speakers Replacement

Was du brauchst

  1. HTC Wizard 200 Speakers Replacement, Battery: Schritt 1, Bild 1 von 2 HTC Wizard 200 Speakers Replacement, Battery: Schritt 1, Bild 2 von 2
    • To expose the battery, remove the outer case with your fingernail.

    • Remove the battery by pulling the black tab.

  2. HTC Wizard 200 Speakers Replacement, Back Panel: Schritt 2, Bild 1 von 1
    In diesem Schritt verwendetes Werkzeug:
    Spudger
    $3.99
    Kaufen
    • Insert the flat end of the spudger into the two notches on the back of the camera cover and pry them up.

  3. HTC Wizard 200 Speakers Replacement: Schritt 3, Bild 1 von 2 HTC Wizard 200 Speakers Replacement: Schritt 3, Bild 2 von 2
    In diesem Schritt verwendetes Werkzeug:
    Spudger
    $3.99
    Kaufen
    • Work the spudger around the edges of the camera cover until it comes off.

  4. HTC Wizard 200 Speakers Replacement: Schritt 4, Bild 1 von 2 HTC Wizard 200 Speakers Replacement: Schritt 4, Bild 2 von 2
    In diesem Schritt verwendetes Werkzeug:
    T5 Torx Screwdriver
    $5.49
    Kaufen
    • Remove the four 6 mm screws with the T5 Torx screwdriver.

    • One of the screws is under the "void" sticker.

  5. HTC Wizard 200 Speakers Replacement: Schritt 5, Bild 1 von 3 HTC Wizard 200 Speakers Replacement: Schritt 5, Bild 2 von 3 HTC Wizard 200 Speakers Replacement: Schritt 5, Bild 3 von 3
    • Insert the flat end of an iFixit opening tool between the side and inner covers to create a gap.

    • Work the tool around the edges until all the clips release.

  6. HTC Wizard 200 Speakers Replacement: Schritt 6, Bild 1 von 2 HTC Wizard 200 Speakers Replacement: Schritt 6, Bild 2 von 2
    • Once all the clips are open, remove the inner panel from the phone.

  7. HTC Wizard 200 Speakers Replacement, Speakers: Schritt 7, Bild 1 von 2 HTC Wizard 200 Speakers Replacement, Speakers: Schritt 7, Bild 2 von 2
    • Device rotated 180 degrees.

    • Use the plastic opening tool to disconnect the speaker connections.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Kyle Champ

Mitglied seit: 10/03/11

225 Reputation

12 Anleitungen geschrieben

Team

Cal Poly, Team 20-27, Maness Fall 2011 Mitglied von Cal Poly, Team 20-27, Maness Fall 2011

CPSU-MANESS-F11S20G27

4 Mitglieder

24 Anleitungen geschrieben

0 Kommentare

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 0

Letzte 30 Tage: 0

Insgesamt: 717