Zum Hauptinhalt wechseln

Blackberry Bold 9650 Mother Board Replacement

Was du brauchst

  1. Blackberry Bold 9650 Mother Board Replacement, Battery: Schritt 1, Bild 1 von 2 Blackberry Bold 9650 Mother Board Replacement, Battery: Schritt 1, Bild 2 von 2
    • Turn the device upside down.

    • Using your finger, slide the silver cover release button towards the top of the device.

    • Lift and remove the back cover.

  2. Blackberry Bold 9650 Mother Board Replacement: Schritt 2, Bild 1 von 1
    • Using your fingernails, lift the sides of the battery.

    • Remove the battery.

  3. Blackberry Bold 9650 Mother Board Replacement, SIM Card: Schritt 3, Bild 1 von 1
    • Orient the device so that the screen is facing the ground.

    • Using your finger, gently lift the top of the SIM card.

  4. Blackberry Bold 9650 Mother Board Replacement: Schritt 4, Bild 1 von 1
    • Gently pull out the SIM card.

    • The card will break in half if you apply too much force when pulling out the card.

  5. Blackberry Bold 9650 Mother Board Replacement, Back Chassis: Schritt 5, Bild 1 von 1
    • Using a T6 Torx screwdriver, remove the four screws from the bottom half of the device.

  6. Blackberry Bold 9650 Mother Board Replacement: Schritt 6, Bild 1 von 1
    • Orient the device so that the screen is facing you.

    • Using a spudger, remove the ear piece cover.

  7. Blackberry Bold 9650 Mother Board Replacement: Schritt 7, Bild 1 von 1
    • Using a T6 Torx screwdriver, remove the two screws from the top corners of the device.

  8. Blackberry Bold 9650 Mother Board Replacement: Schritt 8, Bild 1 von 1
    • Remove the back chassis by gently pulling the chassis back and forth.

    • The headphone jack can break if the chassis is pulled too forcefully.

  9. Blackberry Bold 9650 Mother Board Replacement, Mother Board: Schritt 9, Bild 1 von 1
    • Orient the device so that the screen is facing the ground, and the top of the phone is facing you.

    • Using a pair of tweezers, lift and remove the following:

    • The two round connectors on the top of the mother board.

    • The round connectors are hooked into the mother board.

    • The flat connector in the lower corner of the mother board.

  10. Blackberry Bold 9650 Mother Board Replacement: Schritt 10, Bild 1 von 1
    • Using your fingers, carefully lift and remove the mother board.

    • The connectors underneath the mother board are delicate and easily damaged.

  11. Blackberry Bold 9650 Mother Board Replacement: Schritt 11, Bild 1 von 1
    • Using a pair of tweezers, remove the three ribbon connectors.

  12. Blackberry Bold 9650 Mother Board Replacement: Schritt 12, Bild 1 von 1
    • Remove the mother board by lifting the board upward.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Ein:e weitere:r Nutzer:in hat diese Anleitung absolviert.

Ryan

Mitglied seit: 03/12/12

696 Reputation

11 Anleitungen geschrieben

Team

Clemson, Team 2-5, Benson Spring 2012 Mitglied von Clemson, Team 2-5, Benson Spring 2012

CLEM-BENSON-S12S2G5

2 Mitglieder

14 Anleitungen geschrieben

0 Kommentare

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 1

Letzte 30 Tage: 8

Insgesamt: 3,785