Zum Hauptinhalt wechseln

Palm Treo 700P Back Case Replacement

Was du brauchst

  1. Palm Treo 700P Back Case Replacement, Battery: Schritt 1, Bild 1 von 3 Palm Treo 700P Back Case Replacement, Battery: Schritt 1, Bild 2 von 3 Palm Treo 700P Back Case Replacement, Battery: Schritt 1, Bild 3 von 3
    • Press the button located just above the Sprint™ logo and then slide the cover down.

  2. Palm Treo 700P Back Case Replacement: Schritt 2, Bild 1 von 2 Palm Treo 700P Back Case Replacement: Schritt 2, Bild 2 von 2
    • Use the small notch on the left hand side of the phone to remove the battery.

  3. Palm Treo 700P Back Case Replacement, Back Case: Schritt 3, Bild 1 von 1
    • Remove the stylus from the phone.

  4. Palm Treo 700P Back Case Replacement: Schritt 4, Bild 1 von 1
    • After removing the battery and stylus, unscrew the 5 Torx screws (using a T-5 Torx screw driver)

  5. Palm Treo 700P Back Case Replacement: Schritt 5, Bild 1 von 1
    • Using the spudger, remove the small rubberized patch under the antenna.

  6. Palm Treo 700P Back Case Replacement: Schritt 6, Bild 1 von 1
    • Unscrew the last two screws using the previous screw driver.

  7. Palm Treo 700P Back Case Replacement: Schritt 7, Bild 1 von 2 Palm Treo 700P Back Case Replacement: Schritt 7, Bild 2 von 2
    • Using the plastic opening tool, gently separate the back case from the phone body.

Abschluss

To reassemble your device, follow these instructions in reverse order.

2 weitere Nutzer:innen haben diese Anleitung absolviert.

James Smith

Mitglied seit: 04/27/12

10 Reputation

3 Anleitungen geschrieben

Team

Cal Poly, Team 12-37, Regan Spring 2012 Mitglied von Cal Poly, Team 12-37, Regan Spring 2012

CPSU-REGAN-S12S12G37

4 Mitglieder

14 Anleitungen geschrieben

0 Kommentare

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 0

Letzte 30 Tage: 0

Insgesamt: 634