Zum Hauptinhalt wechseln

Samsung BD-F5900 DVD Disc Tray Replacement

Was du brauchst

  1. Samsung BD-F5900 DVD Disc Tray Replacement, Top Cover: Schritt 1, Bild 1 von 1
    • Using a #1 Phillips head screwdriver, remove the three 10mm screws on the back panel.

    • Tilt the back of the top cover forward to remove from chassis.

  2. Samsung BD-F5900 DVD Disc Tray Replacement: Schritt 2, Bild 1 von 1
    • Gently pull up on the ribbon cable by the blue tab to remove it from the power supply board.

  3. Samsung BD-F5900 DVD Disc Tray Replacement, DVD Disc Tray: Schritt 3, Bild 1 von 1
    • Remove the two ribbon cables from the Main Logic Board assembly by gently pulling up on the blue tab.

    • Be careful not to damage the ribbon cable by using too much force.

  4. Samsung BD-F5900 DVD Disc Tray Replacement: Schritt 4, Bild 1 von 1
    • Using a #1 Phillips head screwdriver, remove the two 7.5 mm screws (one not shown) near the front that secures the disc tray to the chassis.

  5. Samsung BD-F5900 DVD Disc Tray Replacement: Schritt 5, Bild 1 von 1
    • Push two small prongs on either side of disc tray inwards and push disc tray forward.

  6. Samsung BD-F5900 DVD Disc Tray Replacement: Schritt 6, Bild 1 von 1
    • Remove disc tray

Abschluss

To reassemble your device, follow these instructions in reverse order.

Ein:e weitere:r Nutzer:in hat diese Anleitung absolviert.

Louis McKean

Mitglied seit: 10/18/17

528 Reputation

5 Anleitungen geschrieben

Team

USF Tampa, Team S1-G21, Cagle Fall 2017 Mitglied von USF Tampa, Team S1-G21, Cagle Fall 2017

USFT-CAGLE-F17S1G21

3 Mitglieder

5 Anleitungen geschrieben

0 Kommentare

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 0

Letzte 30 Tage: 3

Insgesamt: 643