Zum Hauptinhalt wechseln

Bose Soundlink Revolve Bottom Circuit Board Replacement

Was du brauchst

  1. Bose Soundlink Revolve Bottom Circuit Board Replacement, Bottom Circuit Board Access: Schritt 1, Bild 1 von 2 Bose Soundlink Revolve Bottom Circuit Board Replacement, Bottom Circuit Board Access: Schritt 1, Bild 2 von 2
    • Flip speaker over so that the bottom is facing up.

    • Using the blue spudger, lift the gray foam up and slowly peel it off with your hand.

  2. Bose Soundlink Revolve Bottom Circuit Board Replacement: Schritt 2, Bild 1 von 3 Bose Soundlink Revolve Bottom Circuit Board Replacement: Schritt 2, Bild 2 von 3 Bose Soundlink Revolve Bottom Circuit Board Replacement: Schritt 2, Bild 3 von 3
    • Using the screwdriver, unscrew three screws.

    • Detach the bottom cover from the rest of the speaker by pulling the two in opposite directions.

  3. Bose Soundlink Revolve Bottom Circuit Board Replacement: Schritt 3, Bild 1 von 2 Bose Soundlink Revolve Bottom Circuit Board Replacement: Schritt 3, Bild 2 von 2
    • Remove the screw that is above the charging port.

  4. Bose Soundlink Revolve Bottom Circuit Board Replacement: Schritt 4, Bild 1 von 2 Bose Soundlink Revolve Bottom Circuit Board Replacement: Schritt 4, Bild 2 von 2
    • Remove the two screws connecting the motherboard to the bottom cover of the speaker.

    • Remove the bottom cover.

  5. Bose Soundlink Revolve Bottom Circuit Board Replacement, AUX/USB Port: Schritt 5, Bild 1 von 3 Bose Soundlink Revolve Bottom Circuit Board Replacement, AUX/USB Port: Schritt 5, Bild 2 von 3 Bose Soundlink Revolve Bottom Circuit Board Replacement, AUX/USB Port: Schritt 5, Bild 3 von 3
    • Using the blue plastic opening tool, pry up the small black clamp connecting the AUX/USB port to the lower circuit board.

    • Remove the AUX/USB port from the device.

  6. Bose Soundlink Revolve Bottom Circuit Board Replacement, Bottom Circuit Board: Schritt 6, Bild 1 von 1
    • Remove the yellow tape over the location where the ribbon from the central speaker meets the bottom circuit board.

    • Use the blue plastic opening tool to pry up the black latch holding down the ribbon.

    • Remove the motherboard from the device.

Abschluss

To reassemble your device, follow these instructions in reverse order.

5 weitere Nutzer:innen haben diese Anleitung absolviert.

Brian Butner

Mitglied seit: 09/27/17

804 Reputation

3 Anleitungen geschrieben

Team

USF Tampa, Team S6-G2, Remmell Fall 2017 Mitglied von USF Tampa, Team S6-G2, Remmell Fall 2017

USFT-REMMELL-F17S6G2

4 Mitglieder

4 Anleitungen geschrieben

42 Kommentare

I need the ribbon because it is damage, can you sell one to me?

My email is ttegil@hotmail.com can you send me the way I can buy it.

Kind regards

Gilberto - Antwort

Hello do toi fond thé ribbon because i have thé same problème .

M'y email adresse thualromain44.rt@gmail.com

Thanks you

romain thual -

Hi I need bottom circuit board for bose revolve , could you sale it for me. mail: seawolf1974@mail.ru , delivery to Spain

kindly regards

seawolf1974 - Antwort

I need bottom circuit board for Bose revolve, can I get it available in Nigeria, @sullivaniheme@gmail.com

Sullivan - Antwort

Hey there, I also require the bottom circuit board for my Bose Revolve sam.rowlands@hotmail.com

Sam - Antwort

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 4

Letzte 7 Tage: 25

Letzte 30 Tage: 101

Insgesamt: 13,825