Einleitung
Use this guide to replace the top motherboard on your device.
Was du brauchst
-
-
Flip speaker over so that the bottom is facing up.
-
Using the blue spudger, lift the gray foam up and slowly peel it off with your hand.
-
-
-
Using the screwdriver, unscrew three screws.
-
Detach the bottom cover from the rest of the speaker by pulling the two in opposite directions.
-
-
-
-
Remove the two screws connecting the motherboard to the bottom cover of the speaker.
-
Remove the bottom cover.
-
-
-
Using your hands, grip and separate the soft plastic and the metal casing away from each other with some small force.
-
-
-
Lift up and look on the underside of the circuit board.
-
Using the plastic opening tool, pry open the wide clamp keeping a ribbon to the top circuit board. The top circuit board can now freely be removed from the device.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Rückgängig: Ich habe diese Anleitung nicht absolviert.
10 weitere Nutzer:innen haben diese Anleitung absolviert.
Team
USF Tampa, Team S6-G2, Remmell Fall 2017 Mitglied von USF Tampa, Team S6-G2, Remmell Fall 2017
USFT-REMMELL-F17S6G2
4 Mitglieder
4 Anleitungen geschrieben
12 Kommentare
Same here. My speaker had one circuit replacement on warranty but now need a second replacement and I not willing to pay half the price of a new speaker each a every year. Can you help please ?
My e-mail is fmtbmp@gmail.com
Hi, I need to buy the top and bottom circuit board and was wondering the same. Any help with where to purchase these would be appreciated,
Thanks, my email is fayclaybrook28@outlook.com
I am also looking for a top circuit board replacement. Where can I get one. michael@parsche.net
