Zum Hauptinhalt wechseln

Alienware M11x Display Assembly Replacement

Was du brauchst

  1. Alienware M11x Display Assembly Replacement, Introduction: Schritt 1, Bild 1 von 1
    • WARNING: Before working inside your computer, read the safety information that shipped with your computer.

    • CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as a connector on your computer).

    • NOTE: Dell or Alienware does not guarantee compatibility or provide support for hard drives from sources other than Dell.

    • NOTE: If you are installing a hard drive from a source other than Dell or Alienware, you need to install an operating system, drivers, and utilities on the new hard drive.

  2. Alienware M11x Display Assembly Replacement, Loosen the Screws: Schritt 2, Bild 1 von 1
    • Loosen the two captive screws that secure the hard-drive assembly to the computer base.

  3. Alienware M11x Display Assembly Replacement, Disconnecting the Hard-Drive: Schritt 3, Bild 1 von 1
    • Using the pull-tab, pull the hard-drive assembly to disconnect the hard-drive assembly from the connector on the system board.

  4. Alienware M11x Display Assembly Replacement, Lifting the Hard-Drive Assembly: Schritt 4, Bild 1 von 1
    • Lift the hard-drive assembly out of the computer base.

  5. Alienware M11x Display Assembly Replacement, Removing the Screws from the Hard-Drive: Schritt 5, Bild 1 von 1
    • Remove the four screws that secure the hard drive to the hard-drive bracket.

  6. Alienware M11x Display Assembly Replacement, Removing the Bracket: Schritt 6, Bild 1 von 1
    • Lift the hard drive away from the hard-drive bracket.

  7. Alienware M11x Display Assembly Replacement, Placing the Hard-Drive: Schritt 7, Bild 1 von 1
    • Place the NEW hard drive in the hard-drive bracket.

  8. Alienware M11x Display Assembly Replacement, Replace the Screws: Schritt 8, Bild 1 von 1
    • Replace the four screws that secure the hard-drive to the hard-drive bracket.

  9. Alienware M11x Display Assembly Replacement, Placing the Hard-Drive: Schritt 9, Bild 1 von 1
    • Place the hard-drive assembly in the computer base.

  10. Alienware M11x Display Assembly Replacement, Connecting the Hard-Drive Assembly: Schritt 10, Bild 1 von 1
    • Use the pull-tab to push the hard drive assembly and connect it to the connector on the system board.

  11. Alienware M11x Display Assembly Replacement, Securing the Screws: Schritt 11, Bild 1 von 1
    • Tighten the two captive screws that secure the hard-drive assembly to the computer base.

Ziellinie

2 weitere Nutzer:innen haben diese Anleitung absolviert.

darrius

Mitglied seit: 03/26/18

5.213 Reputation

30 Anleitungen geschrieben

Team

RampUP America, Inc. Mitglied von RampUP America, Inc.

Community

42 Mitglieder

1.985 Anleitungen geschrieben

0 Kommentare

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 0

Letzte 30 Tage: 9

Insgesamt: 463