Einleitung
In this guide, we will be showing you how to remove and replace the Display Assembly.
Was du brauchst
-
-
Loosen the two captive screws that secure the hard-drive assembly to the computer base.
-
-
-
Using the pull-tab, pull the hard-drive assembly to disconnect the hard-drive assembly from the connector on the system board.
-
-
-
Lift the hard-drive assembly out of the computer base.
-
-
-
-
Remove the four screws that secure the hard drive to the hard-drive bracket.
-
-
-
Replace the four screws that secure the hard-drive to the hard-drive bracket.
-
-
-
Use the pull-tab to push the hard drive assembly and connect it to the connector on the system board.
-
-
-
Tighten the two captive screws that secure the hard-drive assembly to the computer base.
-
Rückgängig: Ich habe diese Anleitung nicht absolviert.
2 weitere Nutzer:innen haben diese Anleitung absolviert.