Zum Hauptinhalt wechseln

HP Stream 13-c010nr Charging Port Replacement

Was du brauchst

  1. HP Stream 13-c010nr Charging Port Replacement, HP Stream 13-c010nr Disassembly: Schritt 1, Bild 1 von 1
    • Remove the five rubber feet from the bottom of the laptop with a plastic opening tool.

  2. HP Stream 13-c010nr Charging Port Replacement: Schritt 2, Bild 1 von 2 HP Stream 13-c010nr Charging Port Replacement: Schritt 2, Bild 2 von 2
    • Remove the thirteen 5mm Phillips #0 screws from the bottom case.

  3. HP Stream 13-c010nr Charging Port Replacement: Schritt 3, Bild 1 von 2 HP Stream 13-c010nr Charging Port Replacement: Schritt 3, Bild 2 von 2
    • Flip the laptop over and open it up.

    • Wedge a plastic opening tool between the keyboard and bottom case, pry upwards to separate the two pieces.

    • Lift up the keyboard.

    • Ribbon cables still connect the two pieces.

  4. HP Stream 13-c010nr Charging Port Replacement: Schritt 4, Bild 1 von 1
    • Use a spudger to flip up the retaining flaps on the keyboard ribbon cable ZIF sockets.

    • Pull up the ribbon cables from their sockets.

  5. HP Stream 13-c010nr Charging Port Replacement, Charging Port: Schritt 5, Bild 1 von 1
    • Disconnect the charging port from the motherboard.

  6. HP Stream 13-c010nr Charging Port Replacement: Schritt 6, Bild 1 von 2 HP Stream 13-c010nr Charging Port Replacement: Schritt 6, Bild 2 von 2
    • Remove the two 5mm Phillips screws from the charging port.

    • Remove the bracket.

    • Pull out the charging port.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Keegan Lapham

Mitglied seit: 02/22/18

759 Reputation

6 Anleitungen geschrieben

Team

USF Tampa, Team S1-G3, Cagle Spring 2018 Mitglied von USF Tampa, Team S1-G3, Cagle Spring 2018

USFT-CAGLE-S18S1G3

4 Mitglieder

12 Anleitungen geschrieben

0 Kommentare

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 0

Letzte 30 Tage: 4

Insgesamt: 492