Zum Hauptinhalt wechseln

HP Elitebook 2740p Screen Replacement

Was du brauchst

  1. HP Elitebook 2740p Screen Replacement, Battery: Schritt 1, Bild 1 von 1
    • Slide the lock tab to the right.

  2. HP Elitebook 2740p Screen Replacement: Schritt 2, Bild 1 von 1
    • Lift and remove the battery from the battery compartment.

  3. HP Elitebook 2740p Screen Replacement, Screen: Schritt 3, Bild 1 von 3 HP Elitebook 2740p Screen Replacement, Screen: Schritt 3, Bild 2 von 3 HP Elitebook 2740p Screen Replacement, Screen: Schritt 3, Bild 3 von 3
    • Locate the radio antenna on the right side of the top edge of the screen. Slide the latch to release the antenna.

    • Use a Phillips #0 screwdriver to remove the two 4 mm screws recessed in the antenna housing.

  4. HP Elitebook 2740p Screen Replacement: Schritt 4, Bild 1 von 3 HP Elitebook 2740p Screen Replacement: Schritt 4, Bild 2 von 3 HP Elitebook 2740p Screen Replacement: Schritt 4, Bild 3 von 3
    • Use a metal spudger to separate bezel from laptop body. there are tabs holding the bezel on along the entire bezel.

    • Pay special attention to the hinge cover at the bottom. It has tabs at both the top and bottom.

    • Remove the bezel from the laptop.

  5. HP Elitebook 2740p Screen Replacement: Schritt 5, Bild 1 von 3 HP Elitebook 2740p Screen Replacement: Schritt 5, Bild 2 von 3 HP Elitebook 2740p Screen Replacement: Schritt 5, Bild 3 von 3
    • Use a Phillips #0 screwdriver to remove the eight 4 mm screws that hold the frame of the screen in place.

    • Use a Phillips #00 screwdriver to remove the single 3 mm screw at the corner of the frame.

  6. HP Elitebook 2740p Screen Replacement: Schritt 6, Bild 1 von 3 HP Elitebook 2740p Screen Replacement: Schritt 6, Bild 2 von 3 HP Elitebook 2740p Screen Replacement: Schritt 6, Bild 3 von 3
    • Use a Phillips #0 screwdriver to remove the two 4 mm screws that hold the tilt button in place.

    • Remove the tilt button.

  7. HP Elitebook 2740p Screen Replacement: Schritt 7, Bild 1 von 3 HP Elitebook 2740p Screen Replacement: Schritt 7, Bild 2 von 3 HP Elitebook 2740p Screen Replacement: Schritt 7, Bild 3 von 3
    • Use a Phillips #0 screwdriver to remove the three screws that secure the tablet-mode button board.

    • Disconnect the two blue ribbon cables and gently pull them free.

    • Remove the PCB board from the screen housing.

  8. HP Elitebook 2740p Screen Replacement: Schritt 8, Bild 1 von 3 HP Elitebook 2740p Screen Replacement: Schritt 8, Bild 2 von 3 HP Elitebook 2740p Screen Replacement: Schritt 8, Bild 3 von 3
    • Remove the gray rubber pad at the top of the screen next to the camera.

    • Remove the 3mm screw with a Phillips #0 screwdriver

    • Carefully tilt the screen down onto the keayboard

  9. HP Elitebook 2740p Screen Replacement: Schritt 9, Bild 1 von 2 HP Elitebook 2740p Screen Replacement: Schritt 9, Bild 2 von 2
    • Fold the protective foil back from the ribbon cables.

  10. HP Elitebook 2740p Screen Replacement: Schritt 10, Bild 1 von 3 HP Elitebook 2740p Screen Replacement: Schritt 10, Bild 2 von 3 HP Elitebook 2740p Screen Replacement: Schritt 10, Bild 3 von 3
    • Unseat display ribbon cables.

    • Ribbon cables are secured with tape. Do not force the cables out of their sockets.

    • Remove the screen.

Abschluss

To reassemble your device, follow these instructions in reverse order.

3 weitere Nutzer:innen haben diese Anleitung absolviert.

Joseph Hazel

Mitglied seit: 03/24/17

329 Reputation

2 Anleitungen geschrieben

Team

UMass Dartmouth, Team S8-G4, Valliere Spring 2018 Mitglied von UMass Dartmouth, Team S8-G4, Valliere Spring 2018

UMASSD-VALLIERE-S18S8G4

3 Mitglieder

6 Anleitungen geschrieben

0 Kommentare

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 0

Letzte 30 Tage: 4

Insgesamt: 1,339