Einleitung
This guide will provide the steps of removing the back casing of the device and removing the damaged battery.
Was du brauchst
-
-
Power down the device and make sure that it is turned off.
-
Insert the plastic opening tool into the bracket space on the back bottom left of the phone.
-
Gently twist tool clockwise until the back case pops open [this will create a small gap].
-
Slide the tool along the gap around the entire device.
-
-
-
-
Insert the plastic opening tool into the indent below the battery, and pry up to lift and remove the battery.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Rückgängig: Ich habe diese Anleitung nicht absolviert.
Ein:e weitere:r Nutzer:in hat diese Anleitung absolviert.
Team
Eastern Washington University, Team S1-G2, Carnegie Spring 2018 Mitglied von Eastern Washington University, Team S1-G2, Carnegie Spring 2018
EWU-CARNEGIE-S18S1G2
4 Mitglieder
10 Anleitungen geschrieben
