Zum Hauptinhalt wechseln

Black and Decker Toast R Oven Knobs Replacement

Was du brauchst

  1. Black and Decker Toast R Oven Knobs Replacement, Knobs: Schritt 1, Bild 1 von 1
    • Make sure that the toaster is unplugged before you begin.

    • Turn the toaster upside down and remove the two Phillips #4 1 cm screws attached to the side panels.

  2. Black and Decker Toast R Oven Knobs Replacement: Schritt 2, Bild 1 von 2 Black and Decker Toast R Oven Knobs Replacement: Schritt 2, Bild 2 von 2
    • Pull down and out to remove side panels from the unit

    • Repeat for the other side.

  3. Black and Decker Toast R Oven Knobs Replacement: Schritt 3, Bild 1 von 1
    • Remove the bottom vent.

    • This should come off fairly easy.

  4. Black and Decker Toast R Oven Knobs Replacement: Schritt 4, Bild 1 von 1
    • Remove the two Phillips #4 1 cm screws that connect the bottom panel to the unit.

  5. Black and Decker Toast R Oven Knobs Replacement: Schritt 5, Bild 1 von 1
    • Remove the crumb tray (bottom metal panel) from the toaster unit.

  6. Black and Decker Toast R Oven Knobs Replacement: Schritt 6, Bild 1 von 1
    • Remove the aluminum strip on the bottom of the unit.

  7. Black and Decker Toast R Oven Knobs Replacement: Schritt 7, Bild 1 von 1
    • Remove knobs by pulling up on them.

  8. Black and Decker Toast R Oven Knobs Replacement: Schritt 8, Bild 1 von 1
    • Unhook the bottom of the display panel from the toaster unit.

    • It will be a little tough to pry off, but don't be afraid to be forceful.

  9. Black and Decker Toast R Oven Knobs Replacement: Schritt 9, Bild 1 von 1
    • Begin to detach the back panel from the toaster unit and unhook the rest of the display panel.

    • This will also be a little tough to get off, but don't be afraid to be forceful.

Abschluss

To reassemble your toaster, follow these directions in reverse.

Ein:e weitere:r Nutzer:in hat diese Anleitung absolviert.

Jonathan

Mitglied seit: 09/18/12

281 Reputation

5 Anleitungen geschrieben

Team

Cal Poly, Team 2-10, Propen Fall 2012 Mitglied von Cal Poly, Team 2-10, Propen Fall 2012

CPSU-PROPEN-F12S2G10

4 Mitglieder

5 Anleitungen geschrieben

Ein Kommentar

very interesting post

James Evans - Antwort

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 3

Letzte 7 Tage: 4

Letzte 30 Tage: 17

Insgesamt: 4,792