Zum Hauptinhalt wechseln

2010-2017 Suzuki Swift Tail Light Bulb Replacement

Was du brauchst

  1. 2010-2017 Suzuki Swift Tail Light Bulb Replacement, loosen the tail light: Schritt 1, Bild 1 von 3 2010-2017 Suzuki Swift Tail Light Bulb Replacement, loosen the tail light: Schritt 1, Bild 2 von 3 2010-2017 Suzuki Swift Tail Light Bulb Replacement, loosen the tail light: Schritt 1, Bild 3 von 3
    • Unscrew the two visible bolts.

    • After unscrewing the bolts, the other side of the light is still fastened by two clickable plugs.

    • Using the panel removal tool, pry behind each corner and unclick each plug.

  2. 2010-2017 Suzuki Swift Tail Light Bulb Replacement, access backside of the light: Schritt 2, Bild 1 von 1
    • Remove the light from the frame and place it on the tailgate.

    • You might need to remove some of the cabling from cable guides.

    • You can also better see the plugs that held the light in place.

  3. 2010-2017 Suzuki Swift Tail Light Bulb Replacement, remove the fitting: Schritt 3, Bild 1 von 1
    • Unscrew the fitting about 45 degrees and lift it from the casing.

  4. 2010-2017 Suzuki Swift Tail Light Bulb Replacement, replace the bulb: Schritt 4, Bild 1 von 2 2010-2017 Suzuki Swift Tail Light Bulb Replacement, replace the bulb: Schritt 4, Bild 2 von 2
    • Remove the bulb by turning it about 45 degrees.

    • And do the reverse with the new bulb, push and turn.

    • The bulb has 2 guide pins assuring a correct install.

    • The fitting has 2 corresponding receivers.

  5. 2010-2017 Suzuki Swift Tail Light Bulb Replacement, insert fitting: Schritt 5, Bild 1 von 1
    • Insert the fitting by matching up the fitting guides with their openings on the casing and turn it 45 degrees clockwise.

  6. 2010-2017 Suzuki Swift Tail Light Bulb Replacement, put the light back: Schritt 6, Bild 1 von 1
    • Tuck back any cables you loosened, and place the light back on the car frame.

    • Make sure the replaced light actually works.

    • Push the light plugs back in.

    • Put the 2 screws back in.

    • You are done.

Ziellinie

5 weitere Nutzer:innen haben diese Anleitung absolviert.

knipwim

Mitglied seit: 09/01/18

8.516 Reputation

30 Anleitungen geschrieben

Ein Kommentar

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 12

Letzte 7 Tage: 87

Letzte 30 Tage: 433

Insgesamt: 34,696