Zum Hauptinhalt wechseln

HP Beats Special Edition 15-p390nr Fan Replacement

Was du brauchst

  1. HP Beats Special Edition 15-p390nr Fan Replacement, Keyboard: Schritt 1, Bild 1 von 2 HP Beats Special Edition 15-p390nr Fan Replacement, Keyboard: Schritt 1, Bild 2 von 2
    • Turn computer off before starting.

    • Turn computer over and begin removing noticeable 8mm screws with a Phillips #0 screwdriver.

  2. HP Beats Special Edition 15-p390nr Fan Replacement: Schritt 2, Bild 1 von 2 HP Beats Special Edition 15-p390nr Fan Replacement: Schritt 2, Bild 2 von 2
    • Some screws may be hidden under a screw cover.

    • Simply use a metal spudger to pop off the screw cover to unveil the hidden 8mm screw.

    • Screw cover may fly when removing.

  3. HP Beats Special Edition 15-p390nr Fan Replacement: Schritt 3, Bild 1 von 2 HP Beats Special Edition 15-p390nr Fan Replacement: Schritt 3, Bild 2 von 2
    • Once screws are removed you may now remove the optical drive.

    • Remove the hidden 3mm screw in the optical drive port.

  4. HP Beats Special Edition 15-p390nr Fan Replacement: Schritt 4, Bild 1 von 2 HP Beats Special Edition 15-p390nr Fan Replacement: Schritt 4, Bild 2 von 2
    • Remove the rubberized feet located on the left and right shoulder of the computer to uncover hidden 8mm screws.

    • Popping noises are normal.

    • The shoulder caps are removable. Underneath there are 2 additional screws.

  5. HP Beats Special Edition 15-p390nr Fan Replacement: Schritt 5, Bild 1 von 2 HP Beats Special Edition 15-p390nr Fan Replacement: Schritt 5, Bild 2 von 2
    • Flip computer over and wedge metal spudger along the computer to pop off keyboard panel

  6. HP Beats Special Edition 15-p390nr Fan Replacement: Schritt 6, Bild 1 von 2 HP Beats Special Edition 15-p390nr Fan Replacement: Schritt 6, Bild 2 von 2
    • Unclip wires connected to the motherboard and remove keyboard from the device.

    • 17 screws should be removed up to this point.

  7. HP Beats Special Edition 15-p390nr Fan Replacement, Motherboard: Schritt 7, Bild 1 von 1
    • Remove screws from the motherboard.

    • 11 screws should be removed from the motherboard

  8. HP Beats Special Edition 15-p390nr Fan Replacement: Schritt 8, Bild 1 von 1
    • Unclamp wire strips from motherboard.

  9. HP Beats Special Edition 15-p390nr Fan Replacement: Schritt 9, Bild 1 von 1
    • Detach by lifting the motherboard up and flip the motherboard over.

  10. HP Beats Special Edition 15-p390nr Fan Replacement: Schritt 10, Bild 1 von 1
    • Unclip wifi card for further procedures

  11. HP Beats Special Edition 15-p390nr Fan Replacement, Fan: Schritt 11, Bild 1 von 1
    • Remove the fan cable from the connector that connects to the motherboard.

    • Pull straight out to avoid damage to connectors.

  12. HP Beats Special Edition 15-p390nr Fan Replacement: Schritt 12, Bild 1 von 1
    • Remove all three screws that hold the fan to the system board

  13. HP Beats Special Edition 15-p390nr Fan Replacement: Schritt 13, Bild 1 von 1
    • Lift and remove the fan from the top cover.

Abschluss

To reassemble your device, follow these instructions in reverse order.

0 Kommentare

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 1

Letzte 7 Tage: 5

Letzte 30 Tage: 33

Insgesamt: 2,567