Zum Hauptinhalt wechseln

Autosampler Configuration for Node Control (For Old & New Versions)

Was du brauchst

  1. Autosampler Configuration for Node Control  (For Old & New Versions), Starting the configuration process.: Schritt 1, Bild 1 von 3 Autosampler Configuration for Node Control  (For Old & New Versions), Starting the configuration process.: Schritt 1, Bild 2 von 3 Autosampler Configuration for Node Control  (For Old & New Versions), Starting the configuration process.: Schritt 1, Bild 3 von 3
    • 1. Turn on the autosampler. Screen will read "...STANDBY..."

    • 2. Press "ENTER/PROGRAM" button. Use arrows to highlight "CONFIGURE". Press "ENTER/PROGRAM" button

    • This will allow you to use the arrows to shuffle through the different configuration options. To select the one you want, press the "ENTER/PROGRAM" button.

    • 3. Use arrows to find "EVENT MARK". Press the "ENTER/PROGRAM" button.

  2. Autosampler Configuration for Node Control  (For Old & New Versions), Configuring "event mark".: Schritt 2, Bild 1 von 3 Autosampler Configuration for Node Control  (For Old & New Versions), Configuring "event mark".: Schritt 2, Bild 2 von 3 Autosampler Configuration for Node Control  (For Old & New Versions), Configuring "event mark".: Schritt 2, Bild 3 von 3
    • 4. Use arrow to select "CONTINUOUS SIGNAL". Press "ENTER/PROGRAM" button.

    • 5. Use arrow to select "PUMP CYCLE". Press "ENTER/PROGRAM" button.

    • It is critical this setting is configured in order for the sensor node to operate the autosampler!

    • 6. Use arrows to find "EXIT CONFIGURATION." Press "ENTER/PROGRAM" button. This will bring up the screen "...STANDBY...

Ziellinie

Ein:e weitere:r Nutzer:in hat diese Anleitung absolviert.

Brooke Mason

Mitglied seit: 05/29/19

2.928 Reputation

17 Anleitungen geschrieben

Team

Open-Storm Mitglied von Open-Storm

Community

14 Mitglieder

24 Anleitungen geschrieben

0 Kommentare

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 0

Letzte 30 Tage: 2

Insgesamt: 87