Zum Hauptinhalt wechseln

Xbox One S All Digital Edition Top Metal Shield Replacement

Was du brauchst

  1. Xbox One S All Digital Edition Top Metal Shield Replacement, Plastic Enclosure: Schritt 1, Bild 1 von 3 Xbox One S All Digital Edition Top Metal Shield Replacement, Plastic Enclosure: Schritt 1, Bild 2 von 3 Xbox One S All Digital Edition Top Metal Shield Replacement, Plastic Enclosure: Schritt 1, Bild 3 von 3
    • Position the iFixit Opening Tool's riveted edge in between the top and bottom cover of the plastic enclosure.

    • Apply downward pressure on the iFixit Opening Tool until the security clip unlocks.

    • Repeat on different points of the plastic enclosure until the bottom cover is removed.

  2. Xbox One S All Digital Edition Top Metal Shield Replacement: Schritt 2, Bild 1 von 2 Xbox One S All Digital Edition Top Metal Shield Replacement: Schritt 2, Bild 2 von 2
    • Remove the six 50 mm green screws (labeled F1-F6) from the metal chassis using a Torx 10 screwdriver.

    • These screws hold the top cover of the plastic enclosure to the chassis.

  3. Xbox One S All Digital Edition Top Metal Shield Replacement: Schritt 3, Bild 1 von 2 Xbox One S All Digital Edition Top Metal Shield Replacement: Schritt 3, Bild 2 von 2
    • Apply pressure to peel off the sides of the casing.

    • Separate the metal chassis from the top cover, lifting the back of the chassis up and away from the top cover.

    • The plastic back panel is meant to stay attached to the metal chassis.

  4. Xbox One S All Digital Edition Top Metal Shield Replacement: Schritt 4, Bild 1 von 1
    • Flip the metal enclosure so that the fan cover is on top.

  5. Xbox One S All Digital Edition Top Metal Shield Replacement, Top Metal Shield: Schritt 5, Bild 1 von 2 Xbox One S All Digital Edition Top Metal Shield Replacement, Top Metal Shield: Schritt 5, Bild 2 von 2
    • Remove the two 15mm screws from the front panel using the Torx T8 screwdriver.

  6. Xbox One S All Digital Edition Top Metal Shield Replacement: Schritt 6, Bild 1 von 3 Xbox One S All Digital Edition Top Metal Shield Replacement: Schritt 6, Bild 2 von 3 Xbox One S All Digital Edition Top Metal Shield Replacement: Schritt 6, Bild 3 von 3
    • Carefully slide the top metal case off the frame.

    • This may require shifting the case side to side as you slide up.

Abschluss

To reassemble your device, follow these instructions in reverse order.

2 weitere Nutzer:innen haben diese Anleitung absolviert.

Jules Hajjar

Mitglied seit: 10/10/19

1.531 Reputation

8 Anleitungen geschrieben

Team

Cal Poly, Team S12-G6, Regan Fall 2019 Mitglied von Cal Poly, Team S12-G6, Regan Fall 2019

CPSU-REGAN-F19S12G6

4 Mitglieder

25 Anleitungen geschrieben

0 Kommentare

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 1

Letzte 30 Tage: 9

Insgesamt: 678