Zum Hauptinhalt wechseln

American Sanders EZSand Orbital Sander 07163A 2017 Interlock Assembly Replacement

Was du brauchst

  1. American Sanders EZSand Orbital Sander 07163A 2017 Interlock Assembly Replacement, Separate the handle: Schritt 1, Bild 1 von 1
    • Before you begin, make sure the sander is turned off and unplugged.

    • Use a 3/16" hex key or driver bit to remove the six 23.4 mm-long screws holding the two halves of the handle enclosure together.

  2. American Sanders EZSand Orbital Sander 07163A 2017 Interlock Assembly Replacement: Schritt 2, Bild 1 von 3 American Sanders EZSand Orbital Sander 07163A 2017 Interlock Assembly Replacement: Schritt 2, Bild 2 von 3 American Sanders EZSand Orbital Sander 07163A 2017 Interlock Assembly Replacement: Schritt 2, Bild 3 von 3
    • The rear half of the enclosure is bolted to the handle support, so the front half will be removed first.

    • Pull the front half of the enclosure straight away from the rear half to separate the enclosure.

    • If the interlock assembly comes out with the front half of the enclosure, detach it and place it back into the rear half.

    • Remove the front half of the handle enclosure.

  3. American Sanders EZSand Orbital Sander 07163A 2017 Interlock Assembly Replacement, Unplug the interlock assembly: Schritt 3, Bild 1 von 3 American Sanders EZSand Orbital Sander 07163A 2017 Interlock Assembly Replacement, Unplug the interlock assembly: Schritt 3, Bild 2 von 3 American Sanders EZSand Orbital Sander 07163A 2017 Interlock Assembly Replacement, Unplug the interlock assembly: Schritt 3, Bild 3 von 3
    • Pull the wires connected to the interlock assembly straight out of their connectors.

    • Keep track of where each wire connects on the interlock assembly.

  4. American Sanders EZSand Orbital Sander 07163A 2017 Interlock Assembly Replacement, Remove the interlock assembly: Schritt 4, Bild 1 von 1
    • After all wires are disconnected from the interlock assembly, remove the interlock assembly from the handle.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Ein:e weitere:r Nutzer:in hat diese Anleitung absolviert.

Adam O'Camb

Mitglied seit: 04/11/15

195.345 Reputation

416 Anleitungen geschrieben

0 Kommentare

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 0

Letzte 30 Tage: 5

Insgesamt: 435