IBM Thinkpad T60 Hard Drive Replacement

Einleitung

This guide will teach users how to carefully remove an existing hard drive. Remember to always power down the computer before attempting any installation/removal of any hardware components. Be sure to remove the AC adapter and all cables from the computer. If the computer has been on, wait several minutes before beginning the procedure to ensure all parts have cooled down.

Was du brauchst

Schritt 1 Hard Drive

IBM Thinkpad T60 Hard Drive Replacement, Hard Drive: Schritt 1, Bild 1 von 1

Turn the Thinkpad over so you can see the back.
Locate this screw in the bottom left-hand corner.

Übersetzen

Schritt 2

Using a #0 Phillips screwdriver, remove the 17.0 mm screw.

Übersetzen

Schritt 3

Carefully remove the plastic piece covering the hard drive port by pulling perpendicular to the side of the laptop.

Übersetzen

Schritt 4

Use a small screwdriver to locate the black ribbon.
With the screwdriver, pull the black tab out of the slot.

Übersetzen

Schritt 5

Pull gently on the black ribbon and the metal tray carrying the hard drive will slide out.

Übersetzen

Schritt 6

Remove the black plastic coverings on either side of the hard drive.
There is not a hard drive in this example, but the process is the same regardless.

Übersetzen