Zum Hauptinhalt wechseln

InFocus IN3104 Filter Replacement

Was du brauchst

  1. InFocus IN3104 Filter Replacement, Top Cover: Schritt 1, Bild 1 von 3 InFocus IN3104 Filter Replacement, Top Cover: Schritt 1, Bild 2 von 3 InFocus IN3104 Filter Replacement, Top Cover: Schritt 1, Bild 3 von 3
    • Turn the projector so that the lens is facing you.

    • On the left side of the projector, there is a screw and a knob inside of the small grate.

    • Use a Phillips #1 screwdriver to remove the 6 mm screw that secures top cover.

    • Remove the service cover.

  2. InFocus IN3104 Filter Replacement: Schritt 2, Bild 1 von 3 InFocus IN3104 Filter Replacement: Schritt 2, Bild 2 von 3 InFocus IN3104 Filter Replacement: Schritt 2, Bild 3 von 3
    • Use a Phillips #1 screwdriver to remove the seven 6 mm screws.

    • Use a Phillips #1 screwdriver to remove the two 5 mm screws.

    • Remove the top cover.

    • Do not pull the cover too hard. It may damage the wire that is connected to the motherboard.

  3. InFocus IN3104 Filter Replacement, Filter: Schritt 3, Bild 1 von 3 InFocus IN3104 Filter Replacement, Filter: Schritt 3, Bild 2 von 3 InFocus IN3104 Filter Replacement, Filter: Schritt 3, Bild 3 von 3
    • Use a Phillips # 1 screw driver to remove the 6 mm screw that secures the filter.

    • Once the screw is removed, remove the filter by pulling it straight out.

Abschluss

To reassemble your device, follow these instructions in reverse order.

0 Kommentare

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 0

Letzte 30 Tage: 3

Insgesamt: 256