Zum Hauptinhalt wechseln

InFocus IN3104 Lamp Replacement

Was du brauchst

  1. InFocus IN3104 Lamp Replacement, Top Cover: Schritt 1, Bild 1 von 3 InFocus IN3104 Lamp Replacement, Top Cover: Schritt 1, Bild 2 von 3 InFocus IN3104 Lamp Replacement, Top Cover: Schritt 1, Bild 3 von 3
    • Turn the projector so that the lens is facing you.

    • On the left side of the projector, there is a screw and a knob inside of the small grate.

    • Use a Phillips #1 screwdriver to remove the 6 mm screw that secures top cover.

    • Remove the service cover.

  2. InFocus IN3104 Lamp Replacement: Schritt 2, Bild 1 von 3 InFocus IN3104 Lamp Replacement: Schritt 2, Bild 2 von 3 InFocus IN3104 Lamp Replacement: Schritt 2, Bild 3 von 3
    • Use a Phillips #1 screwdriver to remove the seven 6 mm screws.

    • Use a Phillips #1 screwdriver to remove the two 5 mm screws.

    • Remove the top cover.

    • Do not pull the cover too hard. It may damage the wire that is connected to the motherboard.

  3. InFocus IN3104 Lamp Replacement, InFocus IN3104 Metal Cover Disassembly: Schritt 3, Bild 1 von 2 InFocus IN3104 Lamp Replacement, InFocus IN3104 Metal Cover Disassembly: Schritt 3, Bild 2 von 2
    • Use a Phillips #1 screwdriver to remove the nine 6 mm screws.

    • Lift up the metal cover and set it aside to reveal the motherboard.

  4. InFocus IN3104 Lamp Replacement: Schritt 4, Bild 1 von 3 InFocus IN3104 Lamp Replacement: Schritt 4, Bild 2 von 3 InFocus IN3104 Lamp Replacement: Schritt 4, Bild 3 von 3
    • Carefully pry up the black plastic locking bar of the ZIF connector on the motherboard with a plastic spudger.

    • Pull out the blue-tipped, white ribbon cable from the connector.

    • Remove the metal cover.

  5. InFocus IN3104 Lamp Replacement, Lamp: Schritt 5, Bild 1 von 3 InFocus IN3104 Lamp Replacement, Lamp: Schritt 5, Bild 2 von 3 InFocus IN3104 Lamp Replacement, Lamp: Schritt 5, Bild 3 von 3
    • Use a Phillips #0 screwdriver to remove the four 6 mm screws.

    • You may need to use a flexible extender to help remove the screws easily.

  6. InFocus IN3104 Lamp Replacement: Schritt 6, Bild 1 von 3 InFocus IN3104 Lamp Replacement: Schritt 6, Bild 2 von 3 InFocus IN3104 Lamp Replacement: Schritt 6, Bild 3 von 3
    • Remove the lamp power cable situated beside the lamp by pulling it straight out.

    • Remove the lamp by pulling it straight out from the device.

Abschluss

To reassemble your device, follow these instructions in reverse order.

0 Kommentare

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 0

Letzte 30 Tage: 6

Insgesamt: 592