Zum Hauptinhalt wechseln

Lenovo ThinkPad X1 Extreme Fan Replacement

Was du brauchst

  1. Lenovo ThinkPad X1 Extreme Fan Replacement, Back Cover: Schritt 1, Bild 1 von 3 Lenovo ThinkPad X1 Extreme Fan Replacement, Back Cover: Schritt 1, Bild 2 von 3 Lenovo ThinkPad X1 Extreme Fan Replacement, Back Cover: Schritt 1, Bild 3 von 3
    • Power off and unplug your device before you begin.

    • Orient the laptop so that it is bottom up, and the trackpad is closest to you.

    • Unscrew the seven captive screws with a Phillips #00 screwdriver.

    • These screws will loosen, but stay attached to the cover. Do not attempt to completely remove them.

    • Slide a blue opening pick in the gap between the bottom panel and chassis, and pry off the one clip on each side.

    • Remove the back cover from the device.

  2. Lenovo ThinkPad X1 Extreme Fan Replacement, Speakers: Schritt 2, Bild 1 von 1
    • Use a Phillips #00 head screwdriver to remove the four 4 mm screws above the battery.

  3. Lenovo ThinkPad X1 Extreme Fan Replacement: Schritt 3, Bild 1 von 1
    • Lift the speaker modules on either side of the battery out of its pegs, and unwind the cable from the front of the battery.

    • Set the speaker modules out of the way.

  4. Lenovo ThinkPad X1 Extreme Fan Replacement, Battery: Schritt 4, Bild 1 von 3 Lenovo ThinkPad X1 Extreme Fan Replacement, Battery: Schritt 4, Bild 2 von 3 Lenovo ThinkPad X1 Extreme Fan Replacement, Battery: Schritt 4, Bild 3 von 3
    • Use tweezers to peel the plastic cover off the connector.

    • Use a spudger or your fingernail to pry up the battery straight up from the motherboard.

  5. Lenovo ThinkPad X1 Extreme Fan Replacement: Schritt 5, Bild 1 von 1
    • Lift the battery out of the frame and remove it from the device.

  6. Lenovo ThinkPad X1 Extreme Fan Replacement, Fan: Schritt 6, Bild 1 von 3 Lenovo ThinkPad X1 Extreme Fan Replacement, Fan: Schritt 6, Bild 2 von 3 Lenovo ThinkPad X1 Extreme Fan Replacement, Fan: Schritt 6, Bild 3 von 3
    • Unscrew the 3mm screw holding down the wireless adapter using a Phillips #00 screwdriver.

    • Slide the adapter out of its connector.

    • Detach the black and gray cables and separate them from the frame of the fan by gently pulling upwards.

  7. Lenovo ThinkPad X1 Extreme Fan Replacement: Schritt 7, Bild 1 von 2 Lenovo ThinkPad X1 Extreme Fan Replacement: Schritt 7, Bild 2 von 2
    • Unlatch and remove the cable connecting to the frame of the fan by flipping the thin black tab up.

    • Separate the cable from the frame of the fan.

  8. Lenovo ThinkPad X1 Extreme Fan Replacement: Schritt 8, Bild 1 von 2 Lenovo ThinkPad X1 Extreme Fan Replacement: Schritt 8, Bild 2 von 2
    • Loosen the five screws connecting the fan to the motherboard using a Philips #00 head screwdriver.

    • These screws will not come out and will stay connected to the fan.

  9. Lenovo ThinkPad X1 Extreme Fan Replacement: Schritt 9, Bild 1 von 3 Lenovo ThinkPad X1 Extreme Fan Replacement: Schritt 9, Bild 2 von 3 Lenovo ThinkPad X1 Extreme Fan Replacement: Schritt 9, Bild 3 von 3
    • Gently disconnect the two cables located on right and left side of the fan.

    • To identify these, they are labeled "FANR1" and FANL2" on the motherboard.

    • Lift the fan up and out and remove it from the device.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Ein:e weitere:r Nutzer:in hat diese Anleitung absolviert.

Prabdil Sandhu

Mitglied seit: 02/10/20

124 Reputation

1 Anleitung geschrieben

Team

Cal Poly, Team S7-G3, Regan Winter 2020 Mitglied von Cal Poly, Team S7-G3, Regan Winter 2020

CPSU-REGAN-W20S7G3

4 Mitglieder

8 Anleitungen geschrieben

0 Kommentare

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 18

Letzte 30 Tage: 79

Insgesamt: 4,126