Zum Hauptinhalt wechseln

Karcher Carpet Cleaner BRC3015C 2018 Pump Replacement

Was du brauchst

  1. Karcher Carpet Cleaner BRC3015C 2018 Pump Replacement, Disconnect the hose: Schritt 1, Bild 1 von 2 Karcher Carpet Cleaner BRC3015C 2018 Pump Replacement, Disconnect the hose: Schritt 1, Bild 2 von 2
    • Make sure the carpet cleaner is turned off and completely disconnected from power.

    • Pull the hose on the rear of the carpet cleaner straight down to disconnect it.

  2. Karcher Carpet Cleaner BRC3015C 2018 Pump Replacement, Remove the bottom cover: Schritt 2, Bild 1 von 1
    • Use a 3 mm hex key to remove two bolts securing the bottom cover.

  3. Karcher Carpet Cleaner BRC3015C 2018 Pump Replacement: Schritt 3, Bild 1 von 3 Karcher Carpet Cleaner BRC3015C 2018 Pump Replacement: Schritt 3, Bild 2 von 3 Karcher Carpet Cleaner BRC3015C 2018 Pump Replacement: Schritt 3, Bild 3 von 3
    • Rotate the bottom cover down toward the bottom of the carpet cleaner, then pull it straight back toward the rear of the carpet cleaner to remove it.

    • Don't completely remove the cover yet. There is a ground wire connecting the cover to the carpet cleaner that must be disconnected first.

  4. Karcher Carpet Cleaner BRC3015C 2018 Pump Replacement, Disconnect the ground wire: Schritt 4, Bild 1 von 1
    • Pull the yellow and green ground wire connectors straight apart to disconnect the bottom cover's ground wire.

  5. Karcher Carpet Cleaner BRC3015C 2018 Pump Replacement, Remove the pump cover: Schritt 5, Bild 1 von 1
    • Use a 3 mm hex key to remove the four bolts securing the pump cover.

  6. Karcher Carpet Cleaner BRC3015C 2018 Pump Replacement: Schritt 6, Bild 1 von 2 Karcher Carpet Cleaner BRC3015C 2018 Pump Replacement: Schritt 6, Bild 2 von 2
    • Remove the pump cover.

  7. Karcher Carpet Cleaner BRC3015C 2018 Pump Replacement, Remove the pump hoses: Schritt 7, Bild 1 von 2 Karcher Carpet Cleaner BRC3015C 2018 Pump Replacement, Remove the pump hoses: Schritt 7, Bild 2 von 2
    • Use a flathead screwdriver to loosen the hose clamps at both ends of the pump.

  8. Karcher Carpet Cleaner BRC3015C 2018 Pump Replacement: Schritt 8, Bild 1 von 3 Karcher Carpet Cleaner BRC3015C 2018 Pump Replacement: Schritt 8, Bild 2 von 3 Karcher Carpet Cleaner BRC3015C 2018 Pump Replacement: Schritt 8, Bild 3 von 3
    • Pull the hoses at both ends of the pump straight off of their hose barbs to remove them.

  9. Karcher Carpet Cleaner BRC3015C 2018 Pump Replacement, Remove the pump: Schritt 9, Bild 1 von 1
    • Use your fingers to unscrew the hose barb from the outward-facing end of the pump.

  10. Karcher Carpet Cleaner BRC3015C 2018 Pump Replacement: Schritt 10, Bild 1 von 3 Karcher Carpet Cleaner BRC3015C 2018 Pump Replacement: Schritt 10, Bild 2 von 3 Karcher Carpet Cleaner BRC3015C 2018 Pump Replacement: Schritt 10, Bild 3 von 3
    • Bend the outer side of the pump compartment away from the pump very slightly.

    • Slide the pump out of the hole in the side of the pump compartment, then continue to slide the pump out of the compartment.

    • Do not completely remove the pump yet, as it is still tethered to the carpet cleaner by three wires.

  11. Karcher Carpet Cleaner BRC3015C 2018 Pump Replacement: Schritt 11, Bild 1 von 1
    • Use a Phillips #2 screwdriver to remove the screw securing the ground wire to the pump.

    • Remove the ground wire from the pump.

  12. Karcher Carpet Cleaner BRC3015C 2018 Pump Replacement: Schritt 12, Bild 1 von 2 Karcher Carpet Cleaner BRC3015C 2018 Pump Replacement: Schritt 12, Bild 2 von 2
    • Pull the two connectors straight off of the pump to disconnect them from the pump.

  13. Karcher Carpet Cleaner BRC3015C 2018 Pump Replacement: Schritt 13, Bild 1 von 1
    • Use your fingers to unscrew the remaining hose barb from the pump.

  14. Karcher Carpet Cleaner BRC3015C 2018 Pump Replacement: Schritt 14, Bild 1 von 2 Karcher Carpet Cleaner BRC3015C 2018 Pump Replacement: Schritt 14, Bild 2 von 2
    • Your new pump may come with plugs on either end. Use an angled pick or small flathead screwdriver to pry these out before installation.

Abschluss

To reassemble your device, follow these instructions in reverse order.

4 weitere Nutzer:innen haben diese Anleitung absolviert.

Adam O'Camb

Mitglied seit: 04/11/15

195.318 Reputation

416 Anleitungen geschrieben

3 Kommentare

, Yes, why show how to replace it if you cant even buy it? top msg says:

( Karcher Pump, 110/120V 60Hz Flojet 86201110 Not for sale)

GERALD - Antwort

Ask Google for “Kärcher 8.620-111.0”

VauWeh -

The one we have has 4 mm screws. Otherwise, very helpful, thanks.

DAVID - Antwort

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 6

Letzte 30 Tage: 9

Insgesamt: 1,386