Einleitung
In this guide the entire back case will be removed from the device, including the battery and battery cover. A screwdriver will be used in during the guide.
Was du brauchst
-
-
Place thumb on the tab located at the back of the phone and slide button towards your hand and away from phone.
-
While holding down the button, pull cover off with other hand.
-
-
-
-
Using a spudger, remove the four rubber coverings on the lower back plate.
-
-
-
Using a Tri-wing Y0 screwdriver, remove the four 4.4mm screws securing the back plate.
-
-
-
Remove the lower back cover to reveal part of the motherboard and the circular speaker housed in the back cover plate.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Rückgängig: Ich habe diese Anleitung nicht absolviert.
2 weitere Nutzer:innen haben diese Anleitung absolviert.