Zum Hauptinhalt wechseln

BlackBerry 7290 Keypad Replacement

Was du brauchst

  1. BlackBerry 7290 Keypad Replacement, Battery: Schritt 1, Bild 1 von 3 BlackBerry 7290 Keypad Replacement, Battery: Schritt 1, Bild 2 von 3 BlackBerry 7290 Keypad Replacement, Battery: Schritt 1, Bild 3 von 3
    • Apply pressure to the lock button on the back of the device.

    • Slide the battery cover down towards the bottom of the device, revealing the battery compartment.

  2. BlackBerry 7290 Keypad Replacement: Schritt 2, Bild 1 von 3 BlackBerry 7290 Keypad Replacement: Schritt 2, Bild 2 von 3 BlackBerry 7290 Keypad Replacement: Schritt 2, Bild 3 von 3
    • Locate groove along the right side of the battery compartment.

    • Remove battery by prying between the battery and the groove.

  3. BlackBerry 7290 Keypad Replacement, SIM Card: Schritt 3, Bild 1 von 1
    • Slide the SIM card holder to the left to unlock the SIM card.

  4. BlackBerry 7290 Keypad Replacement: Schritt 4, Bild 1 von 2 BlackBerry 7290 Keypad Replacement: Schritt 4, Bild 2 von 2
    • Lift the SIM card holder up.

    • Gently remove the SIM card from the SIM card holder by sliding the card along the railing.

  5. BlackBerry 7290 Keypad Replacement, Side Button: Schritt 5, Bild 1 von 1
    • Locate the four screws along the perimeter of the back casing.

    • Remove the four top screws using a T-6 torx screwdriver.

    • The top four screws are .413 inches.

  6. BlackBerry 7290 Keypad Replacement: Schritt 6, Bild 1 von 2 BlackBerry 7290 Keypad Replacement: Schritt 6, Bild 2 von 2
    • Locate two screws within the lower edge of the inner compartment.

    • Remove the two bottom screws using a T-6 torx screwdriver.

    • The bottom two screws are .2 inches in length.

    • The second picture displays the device after the six screws have been removed.

  7. BlackBerry 7290 Keypad Replacement: Schritt 7, Bild 1 von 1
    • Use the plastic opening tool to apply pressure on the two clips that are located at the bottom of the phone.

  8. BlackBerry 7290 Keypad Replacement: Schritt 8, Bild 1 von 3 BlackBerry 7290 Keypad Replacement: Schritt 8, Bild 2 von 3 BlackBerry 7290 Keypad Replacement: Schritt 8, Bild 3 von 3
    • Remove the back casing from the phone by lifting the unhooked portion, then slide the casing towards the top of the device.

    • Make sure all clips holding the case together are unhooked, so no damage is caused to the case.

  9. BlackBerry 7290 Keypad Replacement: Schritt 9, Bild 1 von 2 BlackBerry 7290 Keypad Replacement: Schritt 9, Bild 2 von 2
    • Locate on the backside of the phone, a screw towards the top of the device.

    • Using a T-6 screwdriver, remove the screw.

    • After the screw has been removed, carefully lift the side button brace to reveal the side button.

  10. BlackBerry 7290 Keypad Replacement, Keypad: Schritt 10, Bild 1 von 1
    • To remove the phone's internals, start by loosening one side by pulling gently.

  11. BlackBerry 7290 Keypad Replacement: Schritt 11, Bild 1 von 1
    • With one side loosened, simply lift the phone internals to separate from the front casing.

  12. BlackBerry 7290 Keypad Replacement: Schritt 12, Bild 1 von 1
    • Turn the internals over to reveal the LCD display.

  13. BlackBerry 7290 Keypad Replacement: Schritt 13, Bild 1 von 2 BlackBerry 7290 Keypad Replacement: Schritt 13, Bild 2 von 2
    • Peel off the rubber keypad buttons from the face plate.

Abschluss

To reassemble your device, follow these instructions in reverse order.

2 weitere Nutzer:innen haben diese Anleitung absolviert.

kmathew

Mitglied seit: 10/17/09

3 Reputation

5 Anleitungen geschrieben

Team

Cal Poly, Team 19-6, Maness Fall 2009 Mitglied von Cal Poly, Team 19-6, Maness Fall 2009

CPSU-MANESS-F09S19G6

5 Mitglieder

7 Anleitungen geschrieben

0 Kommentare

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 0

Letzte 30 Tage: 1

Insgesamt: 3,838