Zum Hauptinhalt wechseln

Dreamer Autoshade Motor Set Screw Adjustment

Was du brauchst

  1. Dreamer Autoshade Motor Set Screw Adjustment, Remove motor hub fasteners: Schritt 1, Bild 1 von 2 Dreamer Autoshade Motor Set Screw Adjustment, Remove motor hub fasteners: Schritt 1, Bild 2 von 2
    • Remove the four Phillips head screws that fasten the motor hub to the tube adapter.

  2. Dreamer Autoshade Motor Set Screw Adjustment, Remove driver bearing cap: Schritt 2, Bild 1 von 2 Dreamer Autoshade Motor Set Screw Adjustment, Remove driver bearing cap: Schritt 2, Bild 2 von 2
    • Using a flathead screwdriver, pry the bearing cap from the tube.

  3. Dreamer Autoshade Motor Set Screw Adjustment, Tighten Motor Set Screw: Schritt 3, Bild 1 von 1
    • Move the hub to the edge of the shaft so it is flush, and tighten the set screw using a T5 screwdriver bit.

    • The hub should fit snugly on the shaft, unable to rotate freely.

    • Optional- Add a drop of thread locking liquid to permanently hold the set screw in place after tightening.

Abschluss

To reassemble your device, follow these instructions in reverse order.

David

Mitglied seit: 11/11/20

734 Reputation

8 Anleitungen geschrieben

0 Kommentare

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 0

Letzte 30 Tage: 0

Insgesamt: 139