Zum Hauptinhalt wechseln

iHome iD95 Button Cover Replacement

Was du brauchst

  1. iHome iD95 Button Cover Replacement, Backup Battery: Schritt 1, Bild 1 von 1
    • Before taking apart the iD95, disconnect the AC cord from the wall socket and AC adapter from the DC jack. Remove any iPods, iPhones, and iPads attached to the device.

    • Flip over the iD95 so the bottom cover is visible and the LCD screen is facing you.

  2. iHome iD95 Button Cover Replacement: Schritt 2, Bild 1 von 1
    • Remove the 10 mm-length, 5 mm-head screw using a Phillips #1 screwdriver.

  3. iHome iD95 Button Cover Replacement: Schritt 3, Bild 1 von 1
    • Use a plastic opening tool to take out the backup battery.

  4. iHome iD95 Button Cover Replacement, Bottom Cover: Schritt 4, Bild 1 von 1
    • Unscrew five 17 mm-length, 6 mm-head screws using a Phillips #1 screwdriver.

  5. iHome iD95 Button Cover Replacement: Schritt 5, Bild 1 von 2 iHome iD95 Button Cover Replacement: Schritt 5, Bild 2 von 2
    • The bottom cover is attached to the back cover by two plastic clips. Don't use excessive force.

    • Insert a plastic opening tool between the edge of the bottom cover and the main body.

    • Gently pry the bottom cover from the body. Start anywhere along the front side of the iD95 and work your way around.

    • Grip the bottom portion of the device and gently lift the front part of the bottom cover a couple centimeters up.

  6. iHome iD95 Button Cover Replacement: Schritt 6, Bild 1 von 2 iHome iD95 Button Cover Replacement: Schritt 6, Bild 2 von 2
    • Potential for device damage: Be careful not to use too much force or you might break the plastic rings holding the side panels in place.

    • Lift up the bottom cover. Pull the side panel up first, out, and away from the device.

    • The side panels have plastic rings that will need to be lifted up and off the cylinders they are placed around.

  7. iHome iD95 Button Cover Replacement: Schritt 7, Bild 1 von 2 iHome iD95 Button Cover Replacement: Schritt 7, Bild 2 von 2
    • Apply the same techniques from the previous step to remove the remaining side panel.

  8. iHome iD95 Button Cover Replacement: Schritt 8, Bild 1 von 3 iHome iD95 Button Cover Replacement: Schritt 8, Bild 2 von 3 iHome iD95 Button Cover Replacement: Schritt 8, Bild 3 von 3
    • Locate the two plastic clips holding the bottom and back cover together.

    • Which clip you remove first is up to you. Rotate the device 90 degrees either left or right. Insert the flat end of a spudger horizontally between the back speaker and the back cover.

    • Place the flat end of the spudger behind one clip and pry it open. This may take repeated attempts.

    • This is the hardest step because the angle is awkward and the visibility is poor. If possible, have someone hold the device or provide lighting.

    • Once a clip has been removed, hold the bottom cover open so the clip will not fall back into place. One clip remains to be removed; you are almost there!

  9. iHome iD95 Button Cover Replacement: Schritt 9, Bild 1 von 2 iHome iD95 Button Cover Replacement: Schritt 9, Bild 2 von 2
    • Use the same steps to remove the remaining clip.

    • The bottom cover is still connected to the motherboard by wiring.

  10. iHome iD95 Button Cover Replacement: Schritt 10, Bild 1 von 2 iHome iD95 Button Cover Replacement: Schritt 10, Bild 2 von 2
    • Use a plastic opening tool to pry off the white ZIF connector joining the wires to the motherboard.

    • Don't pull the wires. Take your time using a plastic opening tool.

  11. iHome iD95 Button Cover Replacement, Speakers: Schritt 11, Bild 1 von 1
    • Take out four 14 mm screws using a Phillips #1 screwdriver.

  12. iHome iD95 Button Cover Replacement: Schritt 12, Bild 1 von 3 iHome iD95 Button Cover Replacement: Schritt 12, Bild 2 von 3 iHome iD95 Button Cover Replacement: Schritt 12, Bild 3 von 3
    • Use a plastic opening tool to lift the two speaker zip connectors from the logic board.

    • Do not pull on the speaker wires directly. Continue to use a plastic opening tool.

  13. iHome iD95 Button Cover Replacement: Schritt 13, Bild 1 von 1
    • Lift and remove both speakers.

  14. iHome iD95 Button Cover Replacement, Button Cover: Schritt 14, Bild 1 von 2 iHome iD95 Button Cover Replacement, Button Cover: Schritt 14, Bild 2 von 2
    • Flip the logic board over.

    • Use a plastic opening tool to pry and lift the iPod adapter zip connector from the logic board.

  15. iHome iD95 Button Cover Replacement: Schritt 15, Bild 1 von 2 iHome iD95 Button Cover Replacement: Schritt 15, Bild 2 von 2
    • Use a plastic opening tool to pry and lift up the white zip connector attaching the LCD screen to the buttons.

  16. iHome iD95 Button Cover Replacement: Schritt 16, Bild 1 von 2 iHome iD95 Button Cover Replacement: Schritt 16, Bild 2 von 2
    • Gently push the screen away from you to dislodge it from the plastic clip holding it in place and then pull up to remove.

  17. iHome iD95 Button Cover Replacement: Schritt 17, Bild 1 von 2 iHome iD95 Button Cover Replacement: Schritt 17, Bild 2 von 2
    • Use a Phillips #000 screwdriver to unscrew six, 5 mm-length 5 mm-head, screws attaching the buttons to the case.

  18. iHome iD95 Button Cover Replacement: Schritt 18, Bild 1 von 2 iHome iD95 Button Cover Replacement: Schritt 18, Bild 2 von 2
    • Behind the green board is the plastic button cover. Slowly lift it off with your hands.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Vincent Chan

Mitglied seit: 04/18/13

19 Reputation

6 Anleitungen geschrieben

Team

Cal Poly, Team 12-37, Amido Spring 2013 Mitglied von Cal Poly, Team 12-37, Amido Spring 2013

CPSU-AMIDO-S13S12G37

4 Mitglieder

7 Anleitungen geschrieben

0 Kommentare

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 0

Letzte 30 Tage: 1

Insgesamt: 554