Zum Hauptinhalt wechseln

Toshiba Portege M300 LCD Replacement

Was du brauchst

  1. Toshiba Portege M300 LCD Replacement, Battery: Schritt 1, Bild 1 von 1
    • Turn the computer over onto its back.

  2. Toshiba Portege M300 LCD Replacement: Schritt 2, Bild 1 von 2 Toshiba Portege M300 LCD Replacement: Schritt 2, Bild 2 von 2
    • Slide the lock on the left side to the unlock position.

    • Slide the lock on the right side to the unlock position until there is a clicking sound.

  3. Toshiba Portege M300 LCD Replacement: Schritt 3, Bild 1 von 2 Toshiba Portege M300 LCD Replacement: Schritt 3, Bild 2 von 2
    • Remove the battery by sliding it away from the laptop.

    • Make sure the two locks from the previous step are in the unlocked position while sliding the battery away.

  4. Toshiba Portege M300 LCD Replacement, LCD: Schritt 4, Bild 1 von 2 Toshiba Portege M300 LCD Replacement, LCD: Schritt 4, Bild 2 von 2
    • Use a plastic opening tool to unsnap the right hand side speaker cover.

  5. Toshiba Portege M300 LCD Replacement: Schritt 5, Bild 1 von 2 Toshiba Portege M300 LCD Replacement: Schritt 5, Bild 2 von 2
    • Remove the rest of the cover by sliding it to the right and lifting the right edge.

  6. Toshiba Portege M300 LCD Replacement: Schritt 6, Bild 1 von 2 Toshiba Portege M300 LCD Replacement: Schritt 6, Bild 2 von 2
    • Remove all eight plastic circular covers on the plastic screen bezel.

    • Only seven of these plastic covers will contain screws underneath.

    • Unscrew all seven screws with a Phillips head #000 screwdriver.

  7. Toshiba Portege M300 LCD Replacement: Schritt 7, Bild 1 von 2 Toshiba Portege M300 LCD Replacement: Schritt 7, Bild 2 von 2
    • Use a plastic opening tool to separate the screen bezel from the rest of the case.

    • Pull at the top edge of the LCD to separate it from the top part of the case.

    • Only separate the casing and the LCD by an inch—there are still wires connecting them.

  8. Toshiba Portege M300 LCD Replacement: Schritt 8, Bild 1 von 2 Toshiba Portege M300 LCD Replacement: Schritt 8, Bild 2 von 2
    • Use a Phillips #000 to unscrew the one 2.8 mm fine thread screw holding the wire connected to the right face of the LCD.

  9. Toshiba Portege M300 LCD Replacement: Schritt 9, Bild 1 von 1
    • Flip the LCD over onto the back.

    • Gently pull the connection on the corner of the LCD to disconnect.

  10. Toshiba Portege M300 LCD Replacement: Schritt 10, Bild 1 von 2 Toshiba Portege M300 LCD Replacement: Schritt 10, Bild 2 von 2
    • Remove the tape connecting LCD to the inverter.

    • Use tweezers to remove the LCD cable from the inverter.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Ein:e weitere:r Nutzer:in hat diese Anleitung absolviert.

Alison Wendt

Mitglied seit: 04/18/13

135 Reputation

6 Anleitungen geschrieben

Team

Cal Poly, Team 21-51, Johann Spring 2013 Mitglied von Cal Poly, Team 21-51, Johann Spring 2013

CPSU-JOHANN-S13S21G51

3 Mitglieder

18 Anleitungen geschrieben

0 Kommentare

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 2

Letzte 7 Tage: 2

Letzte 30 Tage: 4

Insgesamt: 993