Zum Hauptinhalt wechseln

Nokia 6010 screen and speaker replacement

Was du brauchst

  1. Nokia 6010 screen and speaker replacement, Battery: Schritt 1, Bild 1 von 3 Nokia 6010 screen and speaker replacement, Battery: Schritt 1, Bild 2 von 3 Nokia 6010 screen and speaker replacement, Battery: Schritt 1, Bild 3 von 3
    • Press the small tab on the bottom of the back of the phone.

    • Push the back case upward towards the power button. The back case will then pop off.

    • It requires some force, so be careful.

  2. Nokia 6010 screen and speaker replacement: Schritt 2, Bild 1 von 2 Nokia 6010 screen and speaker replacement: Schritt 2, Bild 2 von 2
    • Lift the battery near the bottom and pry up.

  3. Nokia 6010 screen and speaker replacement, SIM Card: Schritt 3, Bild 1 von 1
    • With one hand, press the ridged tab near the visible side of the SIM card.

    • Slide the card out with your other hand.

  4. Nokia 6010 screen and speaker replacement, Keypad: Schritt 4, Bild 1 von 2 Nokia 6010 screen and speaker replacement, Keypad: Schritt 4, Bild 2 von 2
    • Grip the phone on either the sides, the top, or the bottom.

    • Pull the front case away from the rest of the phone.

    • There are no special tabs to keep it in place so it should wiggle free easily.

  5. Nokia 6010 screen and speaker replacement: Schritt 5, Bild 1 von 1
    • Lift the keypad away from the body of the phone.

    • The keypad is the rubber-backed piece with the number keys.

  6. Nokia 6010 screen and speaker replacement, LCD Screen and Speaker: Schritt 6, Bild 1 von 2 Nokia 6010 screen and speaker replacement, LCD Screen and Speaker: Schritt 6, Bild 2 von 2
    • Remove the six screws around the front of the phone body with a T6 screwdriver.

  7. Nokia 6010 screen and speaker replacement: Schritt 7, Bild 1 von 3 Nokia 6010 screen and speaker replacement: Schritt 7, Bild 2 von 3 Nokia 6010 screen and speaker replacement: Schritt 7, Bild 3 von 3
    • Insert your finger underneath the speaker piece and pry away from the phone body.

    • The plastic layer containing the LCD screen and speaker takes some force to remove.

    • There are 4 plastic tabs which keep it in place, but they are hard to press. Be careful and go tab by tab or use a spudger if you are nervous about using too much force.

    • The LCD and the speaker are attached to the same piece and must be replaced together.

Abschluss

To reassemble your device, follow these instructions in reverse order.

2 weitere Nutzer:innen haben diese Anleitung absolviert.

Team

Cal Poly, Team 14-45, Regan Winter 2010 Mitglied von Cal Poly, Team 14-45, Regan Winter 2010

CPSU-REGAN-W10S14G45

5 Mitglieder

16 Anleitungen geschrieben

Ein Kommentar

Greatly appreciated !!!

Tobi Hunt - Antwort

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 0

Letzte 30 Tage: 3

Insgesamt: 4,242