Zum Hauptinhalt wechseln

Nikon D5100 LCD Replacement

Was du brauchst

  1. Nikon D5100 LCD Replacement, LCD: Schritt 1, Bild 1 von 2 Nikon D5100 LCD Replacement, LCD: Schritt 1, Bild 2 von 2
    • Use a Phillips #000 screwdriver to remove the four screws around the perimeter of the LCD panel.

  2. Nikon D5100 LCD Replacement: Schritt 2, Bild 1 von 1
    • Using a fingernail or the flat edge of a spudger inserted into the seam, separate the LCD bevel from the main panel body.

  3. Nikon D5100 LCD Replacement: Schritt 3, Bild 1 von 2 Nikon D5100 LCD Replacement: Schritt 3, Bild 2 von 2
    • Use a spudger to remove the ribbon cables on the LCD's circuit board by flipping up their plastic lock-bars and removing gently pulling them out of their ports.

  4. Nikon D5100 LCD Replacement: Schritt 4, Bild 1 von 1
    • Use a spudger to disconnect the 16-pin cable by gently pulling it upward, away from the circuit board, until it is removed from its port.

  5. Nikon D5100 LCD Replacement: Schritt 5, Bild 1 von 1
    • Desolder the 3 wires (red, yellow, and black) connecting the LCD board to the main camera body.

    • Soldering/desoldering presents potential for device damage and burns. Take all necessary precautions, and always solder/desolder in a well-ventilated workspace.

  6. Nikon D5100 LCD Replacement: Schritt 6, Bild 1 von 2 Nikon D5100 LCD Replacement: Schritt 6, Bild 2 von 2
    • The LCD assembly can now be fully separated from the main camera body.

    • Remove the plastic bezel and metal bracket from the LCD itself to complete the removal process.

Abschluss

To reassemble your device, follow these instructions in reverse order.

9 weitere Nutzer:innen haben diese Anleitung absolviert.

Liz

Mitglied seit: 04/25/14

1.311 Reputation

5 Anleitungen geschrieben

Team

Cal Poly, Team 10-54, Amido Spring 2014 Mitglied von Cal Poly, Team 10-54, Amido Spring 2014

CPSU-AMIDO-S14S10G54

4 Mitglieder

5 Anleitungen geschrieben

6 Kommentare

Thank you so much! My camera was dropped . And yelow and black wires came off. Now i will try to fix it.

What is the functions of these wires?

Ilia - Antwort

Thanks for this Liz.

Removing the broken LCD from my Nikon D5100 seems like something I can do now!

I am unsure ?how to do the soldering bit to attach the new LCD, ?where to attach the wires...

Any help is welcome

Felipe Castro - Antwort

I was able to fix it, thanks to you guys. But the colors that came on the, LCD are weird. At least I can see the image.

Arline Osuna - Antwort

It’s very possible that applying the soldering iron to the board, while still attached to the back, caused the LCD to lose its color alignment and darken the display. I made the same mistake.

Franky -

I am having trouble reconnecting the 16-pin cable to the circuit board. Do you have any tips?

Lyle Ralston - Antwort

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 4

Letzte 7 Tage: 23

Letzte 30 Tage: 74

Insgesamt: 11,732