Zum Hauptinhalt wechseln

Sony NEX-7 Lens Mount Replacement

Was du brauchst

  1. Sony NEX-7 Lens Mount Replacement, Battery: Schritt 1, Bild 1 von 2 Sony NEX-7 Lens Mount Replacement, Battery: Schritt 1, Bild 2 von 2
    • We need to turn off the camera because we are removing components that could get damaged if the power is still on.

    • If the camera is on, rotate the power switch on top of the camera counterclockwise to turn the camera off.

  2. Sony NEX-7 Lens Mount Replacement: Schritt 2, Bild 1 von 1
    • Flip the camera over such that the power switch points down.

    • Slide the switch on the bottom of the camera grip towards the lens to open the battery door.

  3. Sony NEX-7 Lens Mount Replacement: Schritt 3, Bild 1 von 1
    • With the battery door open, push the blue lever in the battery compartment to release the battery.

  4. Sony NEX-7 Lens Mount Replacement, SD card: Schritt 4, Bild 1 von 1
    • To the left of the battery compartment, the SD card needs to be pushed down slightly with your fingers, which will cause the card to eject.

    • Pull the card out with your fingers.

  5. Sony NEX-7 Lens Mount Replacement, Lens: Schritt 5, Bild 1 von 2 Sony NEX-7 Lens Mount Replacement, Lens: Schritt 5, Bild 2 von 2
    • First, turn the camera upside down.

    • Press the button located next to silver lens mount and rotate the lens counterclockwise.

    • Pull the lens away from the camera body.

    • After removing the lens, replace the lens or attach the body cap as soon as possible to prevent damage to the shutter.

  6. Sony NEX-7 Lens Mount Replacement, Lens Mount: Schritt 6, Bild 1 von 1
    • With the front of the camera facing you, remove the four silver #00 Phillips screws from the metal lens mount.

  7. Sony NEX-7 Lens Mount Replacement: Schritt 7, Bild 1 von 1
    • Remove these three layers from the lens mount with your finger or by turning the camera face down.

  8. Sony NEX-7 Lens Mount Replacement: Schritt 8, Bild 1 von 1
    • Remove the two newly visible #00 screws within the metal ring.

  9. Sony NEX-7 Lens Mount Replacement: Schritt 9, Bild 1 von 1
    • Remove the final metal ring from the mount.

Abschluss

To reassemble your device, follow these instructions in reverse order.

5 weitere Nutzer:innen haben diese Anleitung absolviert.

Jay Miley

Mitglied seit: 04/22/14

5.042 Reputation

13 Anleitungen geschrieben

Team

Cal Poly, Team 10-55, Amido Spring 2014 Mitglied von Cal Poly, Team 10-55, Amido Spring 2014

CPSU-AMIDO-S14S10G55

4 Mitglieder

31 Anleitungen geschrieben

0 Kommentare

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 1

Letzte 7 Tage: 1

Letzte 30 Tage: 11

Insgesamt: 2,190