Zum Hauptinhalt wechseln

Gateway SA1 Disk Drive Replacement

Was du brauchst

  1. Gateway SA1 Disk Drive Replacement, Battery: Schritt 1, Bild 1 von 1
    • Move the latch to the right of the battery to unlock.

  2. Gateway SA1 Disk Drive Replacement: Schritt 2, Bild 1 von 1
    • Slide the latch on the left directly below the battery to unlock and pull out the battery as shown.

    • The latch must be held in position to remove the battery.

  3. Gateway SA1 Disk Drive Replacement, Disk Drive: Schritt 3, Bild 1 von 1
    • Unscrew the marked 5.9 mm Philips screw.

  4. Gateway SA1 Disk Drive Replacement: Schritt 4, Bild 1 von 1
    • Use the spudger to pry out the Disk dive.

  5. Gateway SA1 Disk Drive Replacement: Schritt 5, Bild 1 von 1
    • The disk drive should easily detach and can now be replaced.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Ein:e weitere:r Nutzer:in hat diese Anleitung absolviert.

Team

Cal Poly, Team 24-20, Regan Spring 2010 Mitglied von Cal Poly, Team 24-20, Regan Spring 2010

CPSU-REGAN-S10S24G20

4 Mitglieder

14 Anleitungen geschrieben

0 Kommentare

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 1

Letzte 7 Tage: 1

Letzte 30 Tage: 4

Insgesamt: 3,441