Zum Hauptinhalt wechseln

RIDGID R84015 X2 Planetary Gear Replacement Guide

Was du brauchst

  1. RIDGID R84015 X2 Planetary Gear Replacement Guide, RIDGID R84015 X2 Case Removal: Schritt 1, Bild 1 von 2 RIDGID R84015 X2 Planetary Gear Replacement Guide, RIDGID R84015 X2 Case Removal: Schritt 1, Bild 2 von 2
    • Remove the backplate.

    • Using a Torx T20 screwdriver, remove the four screws attaching the back plate.

  2. RIDGID R84015 X2 Planetary Gear Replacement Guide: Schritt 2, Bild 1 von 1
    • Remove the drill handle.

    • Using the Phillips #2 screwdriver, remove the five screws attaching the drill handle to the body.

  3. RIDGID R84015 X2 Planetary Gear Replacement Guide: Schritt 3, Bild 1 von 2 RIDGID R84015 X2 Planetary Gear Replacement Guide: Schritt 3, Bild 2 von 2
    • Remove the gear casing from the body.

    • Using the Philips #2 screwdriver, remove the four screws attaching the gear casing to the body.

  4. RIDGID R84015 X2 Planetary Gear Replacement Guide, Planetary Gear: Schritt 4, Bild 1 von 1
    • Prepare to remove the gear chamber.

    • Using the Phillips #2 screwdriver, unscrew the four screws at the rear of the plastic gear chamber.

  5. RIDGID R84015 X2 Planetary Gear Replacement Guide: Schritt 5, Bild 1 von 2 RIDGID R84015 X2 Planetary Gear Replacement Guide: Schritt 5, Bild 2 von 2
    • Remove the motor from the drill by gently pulling the motor away from the gear chamber.

    • NOTE: Handle the gear chamber with caution as the gears are now loose.

  6. RIDGID R84015 X2 Planetary Gear Replacement Guide: Schritt 6, Bild 1 von 1
    • Remove the plastic gear chamber.

    • Using the Phillips #2 screwdriver, remove the four screws that attach the plastic gear chamber.

  7. RIDGID R84015 X2 Planetary Gear Replacement Guide: Schritt 7, Bild 1 von 2 RIDGID R84015 X2 Planetary Gear Replacement Guide: Schritt 7, Bild 2 von 2
    • Remove each component from the gear assembly. Replace components as needed.

    • Reassemble the drill following the gear replacement instructions in reverse order.

Ziellinie

4 weitere Nutzer:innen haben diese Anleitung absolviert.

Evan Long

Mitglied seit: 04/15/10

262 Reputation

4 Anleitungen geschrieben

Team

Cal Poly, Team 15-48, Garner Spring 2010 Mitglied von Cal Poly, Team 15-48, Garner Spring 2010

CPSU-GARNER-S10S15G48

6 Mitglieder

10 Anleitungen geschrieben

Ein Kommentar

Very helpful, thank you! I was not sure how to detach the motor from the gearbox and didn't want to apply any brute force, and this explained it well.

YURIY - Antwort

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 7

Letzte 30 Tage: 18

Insgesamt: 6,210